A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Lever action automatic

Lambert
Topic Author
Offline
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

12 Sep 2024 06:31 #257511 by Lambert

Lever action automatic was created by Lambert

I have a lever action transfer box in stores which has definitely been apart and I suspect it might have some spicy gears in it though I need to confirm that manually. If it doesn't then it's not the end of the world to put some in it.

Has anyone successfully put a lever action into an automatic with the post 2005 PRND32L selector, I understand that the shell has the necessary aperture with just a plate over it but do the plastics still fit?

My reasoning is that the automatic is very overdriven especially in top so when I have a trailer on which is regularly it feels laboured or starts hunting so by putting lower gears in it it will put it nearer to the power band. It will also effectively turn 1st into a granny gear meaning I will only need low range when I'm actually off road and will therefore not have to be stopping at the top of my lane to change range just because I have a trailer on.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

Time to create page: 0.129 seconds

Lever action automatic

Events Menu