A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Jimny stuff to print yourself
15 Jul 2024 08:26 - 15 Jul 2024 08:30 #256777
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Jimny stuff to print yourself was created by facade
I've been on thingiverse, and here is my pick of stuff
Gen 3 Grille www.thingiverse.com/thing:6468028
Gen 4 HRW wire covers www.thingiverse.com/thing:5466779
Gen 4 roof storage for your jumper www.thingiverse.com/thing:4676627
Those elusive gearlever bushes for the Gen 3 that you can't seem to get
www.thingiverse.com/thing:6652883 www.thingiverse.com/thing:6619764
Plenty of other parts too.
If you have a resin printer there are some small models to print out, I tried the Dinky sized Gen 4, but my filament printer made a right mess of it in PLA.
Gen 3 Grille www.thingiverse.com/thing:6468028
Gen 4 HRW wire covers www.thingiverse.com/thing:5466779
Gen 4 roof storage for your jumper www.thingiverse.com/thing:4676627
Those elusive gearlever bushes for the Gen 3 that you can't seem to get
www.thingiverse.com/thing:6652883 www.thingiverse.com/thing:6619764
Plenty of other parts too.
If you have a resin printer there are some small models to print out, I tried the Dinky sized Gen 4, but my filament printer made a right mess of it in PLA.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Last edit: 15 Jul 2024 08:30 by facade.
Please Log in or Create an account to join the conversation.
Time to create page: 0.133 seconds