A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Gen 4 16” rims

Lambert
Offline
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

09 May 2023 19:33 #249057 by Lambert

Replied by Lambert on topic Gen 4 16” rims

I think the only thing to add is that not all tyres actually measure what the mathematical size should be. My old bfg urban terrain were accurate to the size they were supposed to be, my factory Bridgestone are about 5 to 7mm under the diameter and about 10mm under the width, whilst my renegade at5's are about 10 mm under diameter but about 5mm over width. This will only get worse if you use a remould tyre.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

Motacilla
Offline
Premium Member
Registered

11 May 2023 14:44 #249082 by Motacilla

Replied by Motacilla on topic Gen 4 16” rims

US website tirerack.com has precise height/circumference measures, along with weights, for most every type and size of tyre. You might be surprised at how much heavier a 16" rim/tyre combo is than a 15".

Please Log in or Create an account to join the conversation.

Time to create page: 0.145 seconds

Gen 4 16” rims

Events Menu