A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Space for 13mm Socket.

More
3 years 6 months ago #248776 by tomcat
I have a big favour to ask of someone.
To refit my front bumper I am considering upsizing the bolt from 6mm to 8mm.
[See my posting Helicoil or Tap}
I would then need to use a 13mm socket.
Does this fit in the gap available? Information appreciated. Thanks.
 

Please Log in or Create an account to join the conversation.

More
3 years 6 months ago #248792 by Lambert
Replied by Lambert on topic Space for 13mm Socket.
If you do that why not use a cap head Allen bolt then you don't have to fit a socket round the outside?

Temeraire, paladin, lawful good.

Bellerophon, thief, chaotic evil.

Leviathan, barbarian, chaotic good.

Please Log in or Create an account to join the conversation.

More
3 years 6 months ago #248794 by Scimike
Replied by Scimike on topic Space for 13mm Socket.
Lambert's suggestion is a fine idea, but for both I suspect a suitable washer is a must to spread the load on the ABS plastic.
The OME fixing (large dome head) on a 2009 is the same diameter as a typical size as a 13mm, so I suspect a socket will clear.

Yokohama Geolanders, Sony head unit, NAUTILUS Air Horn, DRL conversion, Rear cargo space, Elvis Bobblehead, transfer Guard, Indian hanging Elephant, Koni Heavy track dampers, Custom SS exhaust, Voodoo Doll, Adventure Rack with LED ight bar, vintage ERIBA caravan usually attached (yes it's slow)

Please Log in or Create an account to join the conversation.

More
3 years 6 months ago #248796 by tomcat
Replied by tomcat on topic Space for 13mm Socket.
Excellent idea.
Will investigate more.

Please Log in or Create an account to join the conversation.

More
3 years 6 months ago #248797 by tomcat
Replied by tomcat on topic Space for 13mm Socket.
Will have the angle bracket for a bull-guard to spread the load so that not a problem.

Please Log in or Create an account to join the conversation.

Time to create page: 0.097 seconds
Powered by Kunena Forum

We use cookies

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
CookieHint and Consent by reDim GmbH (Opens in a new window)