A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
            
        
    
    Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
E10 Fuel in the UK
- petejones69
- Topic Author
- New Member
- 
             
 Public
 
        Less
        More
        
            
    
        - Thank you received: 0
            
        
                05 Mar 2020 20:50                #219439
        by petejones69
    
    
            
            
            
            
            
                                
    
                                                
    
        E10 Fuel in the UK was created by petejones69            
    
        Not seen anything on the forum about the proposed new E10 fuel in the UK. I'm guessing my 1999 engine will be knackered by it as the RAC are saying any vehicle older than 2002 will be affected.
www.rac.co.uk/drive/advice/emissions/wha...could-it-affect-you/
Pete
    www.rac.co.uk/drive/advice/emissions/wha...could-it-affect-you/
Pete
Please Log in or Create an account to join the conversation.
- Reason2doubt
- 
            
				  
- Offline
- Platinum Member
- 
             
 Registered
 
        Less
        More
        
            
    
        - Posts: 398
- Thank you received: 100
            
        
                05 Mar 2020 21:06                #219442
        by Reason2doubt
    
    
            
            
            
            
            
                                
    
                                                
    
        Replied by Reason2doubt on topic E10 Fuel in the UK            
    
        I had heard about this, same situation for me - 1999 G13B engine might take a bit of a hit with this, if this and other articles are anything to go by.    
    Please Log in or Create an account to join the conversation.
            
        
                05 Mar 2020 21:29                #219445
        by mlines
    
    
            
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
    
    
            
            
            
            
            
                                
    
                                                
    
        Replied by mlines on topic Re:E10 Fuel in the UK            
    
        I have put in a technical question and will let you know when I get a response
Sent from my Pixel 2 XL using Tapatalk
            Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
            
        
                07 Mar 2020 10:47                #219539
        by mlines
    
    
            
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
    
    
            
            
            
            
            
                                
    
                                                
    
        Replied by mlines on topic Re:E10 Fuel in the UK            
    
        Just had it confirmed.
E10 is fine in both new and old Jimnys
            E10 is fine in both new and old Jimnys
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
            
        
                07 Mar 2020 11:50                #219542
        by reedx
    
    
            
            
            
            
            
                                
    
                                                
    
        Replied by reedx on topic Re:E10 Fuel in the UK            
    
        Funnily enough I just noticed last night that my Gen4 fuel filler cap lists both E5 and E10. Hadn't noticed the proposal to move the UK to E10.
Colin
    Colin
Please Log in or Create an account to join the conversation.
- petejones69
- Topic Author
- New Member
- 
             
 Public
 
        Less
        More
        
            
    
        - Thank you received: 0
            
        
                07 Mar 2020 12:05                #219545
        by petejones69
    
    
            
            
            
            
            
                                
    
                                                
    
        Replied by petejones69 on topic E10 Fuel in the UK            
    
        That's good news, thanks very much.    
    Please Log in or Create an account to join the conversation.
        Time to create page: 0.374 seconds    
    
 
                         
            

