Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
What did the postman bring today
Please Log in or Create an account to join the conversation.
- GraphicX
- Visitor
-
Public
mark98 wrote: New BigJimny brake pads came today, hopefully this will kill two birds with one stone. One, stop the horrible noise from the badly worn brake pads, and two, hopefully help to remove the final death wobble symptoms.
when you change the pads i'd recommend cleaning & greasing the caliper sliders as well. i found mine continued to squeak badly even with new pads & that turned out to be the issue. you'll need special rubber grease that you can buy in tiny tubes from an auto parts store.
Please Log in or Create an account to join the conversation.
- atnas666
- Visitor
-
Public
atnas666 wrote: Just use Cooper grease on the calipers :woohoo:
That's what I was going to use. All similar stuff, stops squeaks and greases it up nice
Please Log in or Create an account to join the conversation.
mark98 wrote:
atnas666 wrote: Just use Cooper grease on the calipers :woohoo:
That's what I was going to use. All similar stuff, stops squeaks and greases it up nice
Not on the sliders or it will make the rubber seals swell and not seal.
Use the red rubber grease as suggested and heed this advice learnt the hard way by many of us!
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Please Log in or Create an account to join the conversation.
Please Log in or Create an account to join the conversation.
- Johnniehec
-
- Offline
- Platinum Member
-
Registered
On the 8th Day God made the LandRover -
On the 9th day he swapped it for a Jimny.
Please Log in or Create an account to join the conversation.
- lovely!
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Johnniehec
-
- Offline
- Platinum Member
-
Registered
Please Log in or Create an account to join the conversation.