A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

What did the postman bring today

  • rogerzilla
  • Visitor
  • Visitor
    Public
02 Mar 2024 12:05 #254746 by rogerzilla
Replied by rogerzilla on topic What did the postman bring today
I was doing the same job this morning, fitting yellow halogen fog bulbs (they were easy) and failing to fit LED DRLs - not the Big Jimny ones, but some rather expensive branded ones.  The DRL LEDs just wouldn't go in, despite silicone grease on the O-rings, and I had to refit the Philips OEM bulbs.  I think these lamp.units have very tight tolerances.

Please Log in or Create an account to join the conversation.

More
02 Mar 2024 13:55 #254754 by DrRobin
Thanks Roger, I will bear that in mind when I come to fit them and leave plenty of time. The reason for buying both LEDs together was that I only want to strip everything down once.

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

  • rogerzilla
  • Visitor
  • Visitor
    Public
02 Mar 2024 14:14 #254757 by rogerzilla
Replied by rogerzilla on topic What did the postman bring today
The stripping down only takes a minute or so - the lying on your back checking all three lugs of a P13W bulb are properly engaged is more time-consuming!  Unlike the fogs, it's not obvious which way up they go and, given almost everything involved is plastic, I'd recommend getting down there so you can see the back of the unit.  It's a horrible bulb fitment that I've never had to deal with previously.

Please Log in or Create an account to join the conversation.

More
05 Mar 2024 13:57 #254824 by DrRobin
M6 eye bolts and nylon washers for the load area.
 

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

More
06 Mar 2024 10:15 #254853 by IzakJackson
I finally got around to getting an arm rest - took a while to find one with a cup holder. This is going to make my long trips to the Scottish Highlands much more comfortable! 


I'm an adventure filmmaker & photographer exploring in my Gen 3 Jimny.

Please Log in or Create an account to join the conversation.

More
06 Mar 2024 14:26 #254861 by DrRobin
A genuine Load area rubber mat, see Northumberland Jimny Blog for photo.

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

More
08 Mar 2024 14:10 #254917 by DrRobin
 A 13 pin to 7 pin tow bar plug adaptor for £4.19 from EuroCarParts.

 

My trailer board is old school.

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

Please Log in or Create an account to join the conversation.

More
More
04 Apr 2024 21:07 #255442 by DrRobin
A pair of strong bags made of a carpet like material to keep everything in one place in the back of my Jimny.

 

One is going to be used for my recovery kit, that way I can lift it in when needed.

 

A bit of a bargain at about £6.50 each from a well known auction site.

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

The following user(s) said Thank You: gv42

Please Log in or Create an account to join the conversation.

More
16 Aug 2024 13:11 #257188 by DrRobin
A custom metal sign for my garage/man cave.

 
 

Martin/James hope you don’t mind the use of the BigJimny logo?

Robin

2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog

The following user(s) said Thank You: gv42, Soeley

Please Log in or Create an account to join the conversation.

More
16 Aug 2024 14:59 #257192 by jlines
No problem on the logo. Looks cool. I've just bought a couple of bags for my Jimnys which will match the cars. I'll post some pics when they arrive.

Please Log in or Create an account to join the conversation.

More
16 Aug 2024 20:27 #257194 by mlines
That looks great, no problem on the logo!

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

Time to create page: 0.270 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.