A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Jimny locking hubs
- page
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
01 Jun 2013 16:18 #72387
by page
Jimny locking hubs was created by page
Hello everyone I am fitting manual locking hubs to me jimny just wondering what you do with all the pipes and wires off the vacuum hubs any help thanks
Please Log in or Create an account to join the conversation.
- markyp2000
- New Member
-

Public
Less
More
- Thank you received: 0
01 Jun 2013 16:26 #72388
by markyp2000
Replied by markyp2000 on topic Jimny locking hubs
Take them off the hubs cut a bit of the pipe and put each end on the nipples
Then the same on the trailing arm on the drivers side where it joins the chassis
Then the same on the trailing arm on the drivers side where it joins the chassis
Please Log in or Create an account to join the conversation.
- page
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
01 Jun 2013 16:37 #72389
by page
Replied by page on topic Jimny locking hubs
Can I not get shot of all the vacuum pipes and wires from under the bonnet I am fitting a 1.7 diesel and I don't need it why have it lol
Please Log in or Create an account to join the conversation.
- vitara_mad
- New Member
-

Public
Less
More
- Thank you received: 0
01 Jun 2013 17:03 #72393
by vitara_mad
Replied by vitara_mad on topic Jimny locking hubs
block the holes up where pipes connect to the hubs then remove all the pipe work
Please Log in or Create an account to join the conversation.
- page
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
01 Jun 2013 18:00 #72396
by page
Replied by page on topic Jimny locking hubs
Thanks for that mate I was going to message you vitara_mad
Please Log in or Create an account to join the conversation.
Time to create page: 0.276 seconds
