A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

What did you do to your jimny today?

Smoggy
Visitor
Public

14 May 2013 19:25 - 14 May 2013 19:58 #70705 by Smoggy

Replied by Smoggy on topic What did you do to your jimny today

Basketcase wrote: I like those, where are they attached ?

I fabbed the boxes up using 3mm x 80 x 80 box section then welding a 6mm 80 x 80 end plate on and drilling a 37mm hole through the centre of the end plate for the stainless steel cylindrical shackle mount to slide through from the rear.

The shackle mount is held in place with a circlip.

I then welded each fabbed up box to the bottom of the rear chassis leg ends. The 3mm 50 x 50 box section running between the chassis legs is just there for extra lateral support.

Last edit: 14 May 2013 19:58 by Smoggy.

Please Log in or Create an account to join the conversation.

RichiesJimny
Visitor
Public

14 May 2013 19:33 #70707 by RichiesJimny

Replied by RichiesJimny on topic What did you do to your jimny today

Looks very nice Mike but get the front end sorted out first :laugh: :laugh:
Did you get your rosé joints sorted out?

Please Log in or Create an account to join the conversation.

RichiesJimny
Visitor
Public

14 May 2013 19:39 #70709 by RichiesJimny

Replied by RichiesJimny on topic What did you do to your jimny today

Today I opened the bonnet and thought about fitting the new engine, I stood and looked at it for a few minutes then decided that was a job for another day. I did top the washers up while the bonnet was up though

Please Log in or Create an account to join the conversation.

Smoggy
Visitor
Public

14 May 2013 20:02 #70713 by Smoggy

Replied by Smoggy on topic What did you do to your jimny today

Yeah your right Rich. Just need to get 1 rose joint for the steering and awaiting some bits from Martin. Should have everything in a couple of days fingers crossed.

Then got the full weekend off weekend after this.

Please Log in or Create an account to join the conversation.

GuardianAngel
Visitor
Public

14 May 2013 20:18 - 15 May 2013 21:46 #70721 by GuardianAngel

Replied by GuardianAngel on topic What did you do to your jimny today

Last night and tonight under the J trying to changing one of the TB oil seals. Bloody wet and cold, still not finished. Would be far easier if I had a workshop and could take the whole thing out into the warm and dry

Last edit: 15 May 2013 21:46 by GuardianAngel.

Please Log in or Create an account to join the conversation.

GuardianAngel
Visitor
Public

15 May 2013 21:01 #70819 by GuardianAngel

Replied by GuardianAngel on topic What did you do to your jimny today

Finished oil seal tonight. Got soaked as it p155ed hard (again, as with every night this week).

Was in the shower feeling please with myself then realised I hadn't crimped the flange locking nut :pinch:

Will be underneath it again tomorrow night.

What a tool :angry:

Please Log in or Create an account to join the conversation.

Time to create page: 0.270 seconds

What did you do to your jimny today?

Events Menu