A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Hub Nut Tool
- doncarlyon
- Topic Author
- Visitor
-
Public
03 Mar 2012 18:53 #34747
by doncarlyon
Hub Nut Tool was created by doncarlyon
Anyone in the northeast got one i can borrow?
Please Log in or Create an account to join the conversation.
- vitara_mad
- Visitor
-
Public
03 Mar 2012 22:19 #34771
by vitara_mad
Replied by vitara_mad on topic Re: Hub Nut Tool
i don't have 1 but i know where there is a brand new 1 for sale £25 if interested
Please Log in or Create an account to join the conversation.
- doncarlyon
- Topic Author
- Visitor
-
Public
04 Mar 2012 08:38 #34781
by doncarlyon
Replied by doncarlyon on topic Re: Hub Nut Tool
Been looking at other possibilities..
Basically, jacked the passenger side front wheel up and there is loads of play in the wheel, vertical, horizontal... so its going to be the wheel bearing i think?
Could I just buy a second hand hub from Cam_Suzuki and replace the whole thing, therefore not needing to buy a tool that I will use only once?
Basically, jacked the passenger side front wheel up and there is loads of play in the wheel, vertical, horizontal... so its going to be the wheel bearing i think?
Could I just buy a second hand hub from Cam_Suzuki and replace the whole thing, therefore not needing to buy a tool that I will use only once?
Please Log in or Create an account to join the conversation.
- bluejimny
- Visitor
-
Public
04 Mar 2012 10:01 #34789
by bluejimny
Replied by bluejimny on topic Re: Hub Nut Tool
yes ive also changed the whole hub, its much quicker as well!
Please Log in or Create an account to join the conversation.
- doncarlyon
- Topic Author
- Visitor
-
Public
04 Mar 2012 15:19 #34808
by doncarlyon
Replied by doncarlyon on topic Re: Hub Nut Tool
Nice one, I think I will just do that!!
Thanks for the help!
Thanks for the help!
Please Log in or Create an account to join the conversation.
- doncarlyon
- Topic Author
- Visitor
-
Public
04 Mar 2012 15:27 #34810
by doncarlyon
Replied by doncarlyon on topic Re: Hub Nut Tool
Is there a way of telling if my Jimny has ABS? I dont think it has as ive never felt the juddering pedal...
Its a 2001 Y-reg.
Dont wanna buy the wrong hub!
Its a 2001 Y-reg.
Dont wanna buy the wrong hub!
Please Log in or Create an account to join the conversation.
- Sam_
- Visitor
-
Public
04 Mar 2012 15:41 #34812
by Sam_
Replied by Sam_ on topic Re: Hub Nut Tool
Mines the 2001 and y reg with no abs, not sure if its the same with jimnys as other vehicles but when you turn on ignition check for abs light then? All my previous cars with abs had check lights on the dash.
Please Log in or Create an account to join the conversation.
- doncarlyon
- Topic Author
- Visitor
-
Public
04 Mar 2012 16:01 #34816
by doncarlyon
Replied by doncarlyon on topic Re: Hub Nut Tool
No light on the dash and looking at the ABS hubs they have a "cog" rotor behind the wheel studs... so im pretty sure mine doesnt have ABS.
Hub ordered from CAM Suzuki, get that fitted ASAP!!
Hub ordered from CAM Suzuki, get that fitted ASAP!!
Please Log in or Create an account to join the conversation.
- doncarlyon
- Topic Author
- Visitor
-
Public
10 Mar 2012 17:38 #35248
by doncarlyon
Replied by doncarlyon on topic Re: Hub Nut Tool
Got a hub and knuckle from Cam Suzuki...
Only wanted the hub part so separated them... all done, even managed to do it in my single garage!
Not a bad job but that swivel hub grease / oil really does stink ha ha!
All sorted now, no more wobbly wheel!
Only wanted the hub part so separated them... all done, even managed to do it in my single garage!
Not a bad job but that swivel hub grease / oil really does stink ha ha!
All sorted now, no more wobbly wheel!
Please Log in or Create an account to join the conversation.
Time to create page: 0.181 seconds