rear seats

has enyone taken out seats and borded it out for more room in the back eny pics

I havent got any pics. but i removed the seats, fixed some hooks on either side to tie down the spare wheel. Mines near 32" so just fits! I have fitted a small mdf board across the part where your feet would go if you were sat in the back, and another board fixed to that vertically that stops stuff sliding into the back of the seats. Its nothing flash, wants doing properly really, but dot have the time and it works without adding too much weight
Gary

Hope this helps:)

Chris

Removed my rear seats but didn't board anything up.

This is mine:

no more pics lol

currently designing a new setup - boarded all the way up to the front seats with sides and storage over the wheel arches, will post details and drawings when complete - not sure when as I don't like being cold and wet :S

Halford wrote:

currently designing a new setup - boarded all the way up to the front seats with sides and storage over the wheel arches, will post details and drawings when complete - not sure when as I don't like being cold and wet :S

I thought you northerners were supposed to be hardy and out in all weathers! Only joking...

Kirkynut

:laugh: many years since I've worn a T-shirt on the streets when it was -8 degrees and raining

[quote="kirkynut"
I thought you northerners were supposed to be hardy and out in all weathers! Only joking...

Kirkynut[/quote]


It's only the wimmin that enjoy going out half naked, worse at the weekend once it gets dark!

atb
Mike

I took the rear seats out and fitted this box. It's made for a Land Rover (can I say that name on here??!!). I cut it down and it just fitted between the roll bar braces. Works well and keeps everything safe.