A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Snorkel fitted!
- Keefe
- Visitor
-
Public
08 Feb 2012 21:02 #33089
by Keefe
Replied by Keefe on topic Re: Snorkel fitted!
That's the one I was looking for to start with but couldn't remember where it was.
Thanks.
Thanks.
Please Log in or Create an account to join the conversation.
- Rhondda jimny
- Visitor
-
Public
- Rhondda jimny
- Visitor
-
Public
- funkyjimny
-
- Offline
- Moderator
-
Registered
- 2004 jimny soft top, factory hardtop, ARB bumper
- Dutchjimny
- Visitor
-
Public
- Rhondda jimny
- Visitor
-
Public
09 Feb 2012 17:31 #33147
by Rhondda jimny
Replied by Rhondda jimny on topic Re: Snorkel fitted!
i got a 86mm hole cutter in the end . but thought it would of been to big . so i drilled about 50 holes around and and then file the sharp edges done the trick . what did you all use to paint the edges after cutting ?. and what sealant for the snorkel fitting to the air box ???. wil post sum pics tomorrow of the snorkel fitted and the fitting holes
. what did you all use to paint the edges after cutting ?. and what sealant for the snorkel fitting to the air box ???. wil post sum pics tomorrow of the snorkel fitted and the fitting holes Please Log in or Create an account to join the conversation.
- funkyjimny
-
- Offline
- Moderator
-
Registered
- 2004 jimny soft top, factory hardtop, ARB bumper
- Keefe
- Visitor
-
Public
- Bigchridy
- Topic Author
- Visitor
-
Public
10 Feb 2012 17:29 #33218
by Bigchridy
Where are the pics!:whistle:
Chris
Replied by Bigchridy on topic Re: Snorkel fitted!
Does this mean you've got the snorkel fitted now?Keefe wrote: B&Q magnolia! :laugh:
You could use anything really, it won't show.
Have you any paint or even primer kicking about? Radiator paint? One of those touch-up pens?
That's what I used.
Oh, and black silicon sealant, exterior.
It won't show.
Where are the pics!:whistle:Chris
Please Log in or Create an account to join the conversation.
- Rhondda jimny
- Visitor
-
Public
- Keefe
- Visitor
-
Public
11 Feb 2012 11:05 #33247
by Keefe
LoL!!
Just on with supeeeeeeeeer gluing the cameeeeeeeeeera as I typeeeeeeeeeeeeee.
Sticky keeeeeeeeeeey now!
:laugh:
Replied by Keefe on topic Re: Snorkel fitted!
Bigchridy wrote: Does this mean you've got the snorkel fitted now?
Chris
LoL!!
Just on with supeeeeeeeeer gluing the cameeeeeeeeeera as I typeeeeeeeeeeeeee.
Sticky keeeeeeeeeeey now!
:laugh: Please Log in or Create an account to join the conversation.
- Dutchjimny
- Visitor
-
Public
Time to create page: 0.179 seconds