A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Immobiliser cut in

ZookFastback
New Member
Public

20 Jul 2011 08:36 #19234 by ZookFastback

Replied by ZookFastback on topic Re: Immobiliser cut in

If you do need a new Transponder, they are only about $45 in Oz, not sure of price in UK.

Programming Transponder:

Leave one door open

Disconnect negative battery terminal, wait at least 5 seconds then re-connect
Within 20 second of re-connecting, put key in ignition then cycle the key from "ACC" to on position 20 times, then leave key in "Off" position after 20th turn
Jimny parkers will flash 20 times to indicate successful programming.

If this doesn't work, wait 5 seconds then turn the key from "Acc" to "On" 10 times, leave the key in "Off" position and wait 15 seconds then go through the 20 times thingy again.
The parkers will flash 20 times to indicate you've done the job. On the 20th flash of the parkers, press the button once on each immobiliser you have purchased, stolen or replaced the batteries in.
Turn the key to the "On" position to lok in and exit from the programming mode.

Hope this helps. I've done it nearly every year for the last 10 years as I lose my keys/battery goes flat or done something else stoopid :woohoo:

Please Log in or Create an account to join the conversation.

Time to create page: 0.121 seconds

Immobiliser cut in

Events Menu