A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Engine will not start g13bb aaaarrrrrrr

More
17 Jul 2011 16:01 #19074 by rusty spanner
Just fitted a new engine in my jimny g13b the later engine fitted with crank senser and it will not start iv checked and checked every think I can think of but will not start does try but will not fire any one got any suggestions :angry:

Please Log in or Create an account to join the conversation.

  • rossjimny
  • Visitor
  • Visitor
    Public
17 Jul 2011 21:36 #19084 by rossjimny
Replied by rossjimny on topic Re: Engine will not start g13bb aaaarrrrrrr
hi this might not be much help. i replaced my engine with a more modern one (2004) with the crank sensor and it would not start so i got another 1998 the same as mine and it started first time.

im sorry if this dosnt help check the compresion in the cylinders mine was at 60 and thats not enough so i got the money back.

good luck
Ross

Please Log in or Create an account to join the conversation.

More
18 Jul 2011 04:30 #19085 by mlines
Does the little padlock sign light up on the dashboard (immobiliser)?

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • zaine
  • Visitor
  • Visitor
    Public
18 Jul 2011 08:00 #19101 by zaine
yes like stated above, immob problem?

if its cranking then is fuel getting to it properly? is there a spark?

Please Log in or Create an account to join the conversation.

More
18 Jul 2011 09:44 #19108 by rusty spanner
Yes the padlock lights up and gos out when cranking over but stays on when not cranking over only have the one key for it

Please Log in or Create an account to join the conversation.

  • zaine
  • Visitor
  • Visitor
    Public
19 Jul 2011 07:53 #19174 by zaine
does sound like the immob is stopping it

did you check for a spark / fuel?

Please Log in or Create an account to join the conversation.

More
19 Jul 2011 18:17 #19201 by rusty spanner
Help 99.9% sure the immob cut in have the one key for it any way getting around this hellllllllppppppp

Please Log in or Create an account to join the conversation.

Time to create page: 0.163 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.