hlep fitting a snorkle

hi do any of you guys have pics of fitting a home made snorkle, i have a plan but would just like to see a few home made ones first before i start cutting holes cheers dave.

heres some pics of adams

www.bigjimny.com/index.php?option=com_ku...=7608&Itemid=75#7608

thanks gaz, like you know i have a plan just want to see a few first before i do the cutting :laugh:

for neater fitting use a landrover wing mount. mine was just done for cheapness not bothered about tidyness. but they can look real tidy but i used big drainpipe and it ecos causing it to have a real roar.

ive seen those wing mounts you mean, would look very neat

you have PM dave regarding tuther stuff

Here's a pic of the DIY one I just made using 2" miniline drain pipe from b&q which is the same size as the same size as the standard pipework that goes into the airbox.
1x 2m length of 2" pipe
2x 135 degree bends
2x pipe clamps
1x leaf guard
Total of about £16 from B&Q(not available in all stores)

Also required an air intake pipe from a fiesta zetec and the rubber bend from the original pipework to go on the top.






Dan

very neat!

Just added pics of top and bottom

thanks lads they look great, i will get some pics up when i have made it cheers dave.

One more to look at gromits. www.bigjimny.com/index.php?option=com_ku...=7&id=9579&Itemid=75