Are you building a Mud Monster or a Pavement Princess??
If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!

jimny pickup finaly getting finished

More
05 Apr 2020 18:00 #220733 by Jimny Dr
Hi guys
Finished the floor and sills today and gave the underneath 2 generous coats of black raptor to seal and finish off
Moving get onto the front panel next
Have a look at today’s progress guys
The doc
Attachments:

Please Log in or Create an account to join the conversation.

  • Daniel30
  • Visitor
  • Visitor
    Public
05 Apr 2020 18:40 #220734 by Daniel30
Replied by Daniel30 on topic jimny pickup finaly getting finished
Very nice....

Please Log in or Create an account to join the conversation.

More
05 Apr 2020 19:40 #220735 by HUN

I've just noticed you guys left the vacuum pipes in place. Are you planning to use them? If so it might be worth replacing them with new copper ones?

TrailMaster 2" lift kit
Full floating rear axle conversion, JB underbody guards & recovery points
ORE transfer box HD brackets
T-Max split charge system
X-Shock Dakar ceramic clutch kit & roof rack
Flo-Flex castor polybushes
Kumho KL71 tyres
AVM manual hubs
ORA radius arm guards
Push-fit breathers

Please Log in or Create an account to join the conversation.

More
05 Apr 2020 20:04 #220740 by Jimny Dr
Hi hun
Yes we tasted all the vacuum system and it worked fine so there ok to go again, but we replace the pipes on the axle with silicone hose regardless
When we do the rebuild
Thanks
The doc

Please Log in or Create an account to join the conversation.

More
06 Apr 2020 12:51 #220752 by sniper
Great stuff Doc....

Are you doing any mechanical work while the cab is off..?

sniper

Please Log in or Create an account to join the conversation.

More
06 Apr 2020 17:29 #220756 by Jimny Dr
Hi sniper
Yes we will be rebuilding the gearbox with bearings and seals, fitting new clutch unit at same time.
Then we will work from front to back of the chassis doing brake pipes radius arm caster correct bushes then the rest in polybush new 2” black raptor lift kit aswell.
This is going to be a nice little work horse for some one when it’s done, you know me sniper it has to be Wright
Our moto is do it Wright do it once
Pictures of today’s progress to follow
The doc

Please Log in or Create an account to join the conversation.

Time to create page: 0.162 seconds
Joomla template by a4joomla