Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

My Jimny named R&B

More
06 May 2018 13:53 #192439 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
How much grease :ohmy:
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug
Attachments:

Please Log in or Create an account to join the conversation.

More
06 May 2018 16:56 #192442 by Riccy
Replied by Riccy on topic My Jimny named R&B
:laugh: thats a lot!
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

More
06 May 2018 17:37 #192446 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
Yes matey the hub,swivel and cv where packed solid
Took a while to clean them out :laugh:
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
07 May 2018 06:30 #192461 by Lambert
Replied by Lambert on topic My Jimny named R&B
And somebody will have thought they were doing a good job!
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
12 May 2018 15:43 #192624 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
Load area nearly finished :cheer:
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug
Attachments:

Please Log in or Create an account to join the conversation.

More
03 Aug 2018 14:53 #194812 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
New boots are a little bit too big

Getting a slight rubbing on front chassis to body mount
What are my options i have big hammer
Would be nice to know what others have done

Jack
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug
Attachments:

Please Log in or Create an account to join the conversation.

More
03 Aug 2018 15:52 #194813 by sniper
Replied by sniper on topic My Jimny named R&B
R&B looks well with them on pal, a bit of grinding and a bit of welding.....

It looks quite easy to triangulate / support the mount and allow you to cut away the projection, what an MOT inspector will say I don't know.... I can cut and prep the plates but can't weld anymore. Local garage will weld it for £80 if needed, they are testers too so I can have a word about welding around the mount, again if needed.

sniper

Please Log in or Create an account to join the conversation.

More
03 Aug 2018 16:46 #194814 by Riccy
Replied by Riccy on topic My Jimny named R&B
I put a ratchet strap around the body mount's two sections and squeezed them together a bit (maybe 1" all together).

Also installed some sexy rockwatt extended bump stops, which seemed to help just as much with the same problem.

What size are they? look great on the GV rims :-)
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

More
03 Aug 2018 20:01 #194816 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
225 75 16 i also have rockwatt bump stops fitted too
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug

Please Log in or Create an account to join the conversation.

More
04 Aug 2018 06:12 #194819 by Riccy
Replied by Riccy on topic My Jimny named R&B
so thats a 29.3" tall by 8.9" wide tyre then, compared to the 31x10.5 i have, i am surprised you have a problem with them catching.
Different rims, offset and lift maybe? for reference my rims are 15x8 et -0, theres 30mm wheel spacers and 4.5" lift on the springs
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

More
04 Aug 2018 07:13 #194820 by jackonlyjack
Replied by jackonlyjack on topic My Jimny named R&B
Could be that i have 3" castor arms with a 2" lift. Therfore the axle is pushed forwards
Being over casterd it drives so nice
I have got 4 Honda crv springs so i can go up some
My Jimny
www.bigjimny.com/index.php/forum?view=topic&catid=8&id=60814

www.youtube.com/channel/UCfJa3cPPDZYGwkWr0rvu8ug

Please Log in or Create an account to join the conversation.

More
04 Aug 2018 07:46 #194821 by Riccy
Replied by Riccy on topic My Jimny named R&B
That will explain it then! I too have 3" castor arms, which will be pulled back by inference then
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

Time to create page: 0.192 seconds
Joomla template by a4joomla