A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Can you tell me, how you did the wiring.. ( i mean the way of the cable to inside )
Iám still busy with my rooflights ( photos are coming )
Most difficult for me is, how and were i put the wiring going inside...?
You have 2 options.
First is remove the Ariel and feed the wires down the A Pillar and then pick them up under the right hand side of the dashboard.
Second option is the one I took and that was to drill a 5mm hole in the roof and them deal it with silkaflex, then run the cable under the headlining and down the inside A pillar trim and under the dash
I then used 2 relays to control the lights (outside pair and inside pair)
Later though I replaced the roof rack and lights completely with a dedicated light pod. But kept the wiring.
The hole in the roof being covered by the pod itself
