×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Head unit recommendations for gen 3, 2006
Less
More
- Posts: 974
- Thank you received: 77
- Points: 274.00
07 Jul 2024 17:21 #256676
by robs5230
standard jimny - for now
Head unit recommendations for gen 3, 2006 was created by robs5230
Hi
Looking for some recommendations for an aftermarket head unit, without CD player, from anyone who's fitted one.
Don't want anything too flash and also not wanting a big hole in the dash, if the aftermarket unit is smaller than the Clarion OE unit, so any tips welcome
Thanks
Looking for some recommendations for an aftermarket head unit, without CD player, from anyone who's fitted one.
Don't want anything too flash and also not wanting a big hole in the dash, if the aftermarket unit is smaller than the Clarion OE unit, so any tips welcome
Thanks
standard jimny - for now
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8953
- Thank you received: 1795
- Points: 37154.00
-
07 Jul 2024 17:30 #256677
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Head unit recommendations for gen 3, 2006
You can get a mechless for next to nothing these days all the brands have them it's just a matter of picking your aesthetic favourite. As for the dashboard you can get a new facia from the post 2013 face lift which gives you a proper double din hole to fit the new one and one of the single pockets.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 974
- Thank you received: 77
- Points: 274.00
08 Jul 2024 07:12 #256687
by robs5230
standard jimny - for now
Replied by robs5230 on topic Head unit recommendations for gen 3, 2006
Thanks very much for that
Struggling to find one of those surrounds though, with a pocket below
Struggling to find one of those surrounds though, with a pocket below
standard jimny - for now
Please Log in or Create an account to join the conversation.
08 Jul 2024 08:03 #256688
by Busta
Replied by Busta on topic Head unit recommendations for gen 3, 2006
You buy the double din fascia and add a single din pocket, leaving a single din gap for the headunit.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8953
- Thank you received: 1795
- Points: 37154.00
-
08 Jul 2024 09:16 #256690
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Replied by Lambert on topic Head unit recommendations for gen 3, 2006
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!
Attachments:
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1758
- Thank you received: 433
- Points: 10840.00
08 Jul 2024 12:57 - 08 Jul 2024 12:58 #256694
by DrRobin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Replied by DrRobin on topic Head unit recommendations for gen 3, 2006
This was my set up
www.bigjimny.com/media/kunena/attachments/27291/IMG_6398.jpg
I bought a Xtrons Double DIN head unit made especially for the Jimny with rounded corners, sadly it is no longer sold It gave me DAB, Music Player, Sat Nav, Hands free, front and rear cameras, etc.
Most double DIN have square corners so you have to either get a replacement facia or get the Dremel out.
Unless you want to do what Lambert did and fit a single DIN and a tray.
Robin
www.bigjimny.com/media/kunena/attachments/27291/IMG_6398.jpg
I bought a Xtrons Double DIN head unit made especially for the Jimny with rounded corners, sadly it is no longer sold It gave me DAB, Music Player, Sat Nav, Hands free, front and rear cameras, etc.
Most double DIN have square corners so you have to either get a replacement facia or get the Dremel out.
Unless you want to do what Lambert did and fit a single DIN and a tray.
Robin
2020 blue SZ5 (one of the last to be registered in the UK)
Ex 2011 Blue Jimny SZ4
Northumberland Jimny Blog
Last edit: 08 Jul 2024 12:58 by DrRobin.
Please Log in or Create an account to join the conversation.
Time to create page: 0.126 seconds