× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Heated Screen Switch removal 53 Plate

Start
Prev
1
Next
End

Phaeton
Topic Author
Offline
Premium Member
Registered

20 Jan 2024 15:54 #253608 by Phaeton

Heated Screen Switch removal 53 Plate was created by Phaeton

Any pointers on on getting the switch out, put a pair of heated mirrors on & was going to wire into the switch as per manufacturers wiring

Please Log in or Create an account to join the conversation.

Darthblaker7474
Offline
Elite Member
Registered

22 Jan 2024 20:19 #253671 by Darthblaker7474

Replied by Darthblaker7474 on topic Heated Screen Switch removal 53 Plate

What does this switch look like?

Please Log in or Create an account to join the conversation.

Phaeton
Topic Author
Offline
Premium Member
Registered

22 Jan 2024 20:25 - 22 Jan 2024 20:26 #253673 by Phaeton

Replied by Phaeton on topic Heated Screen Switch removal 53 Plate

It's an oblong one, same size as the Hazard switch, 20x30mm or something similar with a green light & heated screen symbol. It's just a push in/push off I can get something behind the bit the pushes in but I don't want to put too much pressure on. I'll take an image in the morning

Last edit: 22 Jan 2024 20:26 by Phaeton.

Please Log in or Create an account to join the conversation.

Lambert
Offline
Moderator
Registered
The quickest Jimny in Harrogate...(that I own)

23 Jan 2024 06:38 #253683 by Lambert

Replied by Lambert on topic Heated Screen Switch removal 53 Plate

Aren't they held in a mount that you unscrew once you've removed the facia plate?

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

Phaeton
Topic Author
Offline
Premium Member
Registered

23 Jan 2024 20:14 #253701 by Phaeton

Replied by Phaeton on topic Heated Screen Switch removal 53 Plate

This is what it looks like, I don't see anyway to get to it without taking the whole dash out.

Please Log in or Create an account to join the conversation.

Darthblaker7474
Offline
Elite Member
Registered

23 Jan 2024 22:44 #253710 by Darthblaker7474

Replied by Darthblaker7474 on topic Heated Screen Switch removal 53 Plate

It should just pry out with a plastic trim remover or something,

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.116 seconds

Search

Fast Font

Heated Screen Switch removal 53 Plate

Attachments:

The Legal Stuff