A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Heated Screen Switch removal 53 Plate

More
20 Jan 2024 15:54 #253608 by Phaeton
Heated Screen Switch removal 53 Plate was created by Phaeton
Any pointers on on getting the switch out, put a pair of heated mirrors on & was going to wire into the switch as per manufacturers wiring 

Please Log in or Create an account to join the conversation.

More
22 Jan 2024 20:19 #253671 by Darthblaker7474
Replied by Darthblaker7474 on topic Heated Screen Switch removal 53 Plate
What does this switch look like?
600

Please Log in or Create an account to join the conversation.

More
22 Jan 2024 20:25 - 22 Jan 2024 20:26 #253673 by Phaeton
Replied by Phaeton on topic Heated Screen Switch removal 53 Plate
It's an oblong one, same size as the Hazard switch, 20x30mm or something similar with a green light & heated screen symbol. It's just a push in/push off I can get something behind the bit the pushes in but I don't want to put too much pressure on. I'll take an image in the morning
Last edit: 22 Jan 2024 20:26 by Phaeton.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
23 Jan 2024 06:38 #253683 by Lambert
Replied by Lambert on topic Heated Screen Switch removal 53 Plate
Aren't they held in a mount that you unscrew once you've removed the facia plate?
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
23 Jan 2024 20:14 #253701 by Phaeton
Replied by Phaeton on topic Heated Screen Switch removal 53 Plate


This is what it looks like, I don't see anyway to get to it without taking the whole dash out.

Please Log in or Create an account to join the conversation.

More
23 Jan 2024 22:44 #253710 by Darthblaker7474
Replied by Darthblaker7474 on topic Heated Screen Switch removal 53 Plate
It should just pry out with a plastic trim remover or something,
600

Please Log in or Create an account to join the conversation.

Time to create page: 0.139 seconds
Joomla template by a4joomla