A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Technical Tyre Question
07 Dec 2023 13:57 - 07 Dec 2023 13:58 #252696
by Soeley
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Technical Tyre Question was created by Soeley
What is the Marker circled in red, it is the first time I have spotted that one and presuming the bumps circled in yellow are the depth wear markers.
The tyres do have 5.5 to 6.0mm of tread left on them.
The tyres do have 5.5 to 6.0mm of tread left on them.
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Last edit: 07 Dec 2023 13:58 by Soeley.
Please Log in or Create an account to join the conversation.
07 Dec 2023 15:07 #252699
by 300bhpton
Replied by 300bhpton on topic Technical Tyre Question
Please Log in or Create an account to join the conversation.
07 Dec 2023 16:13 #252702
by Soeley
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Replied by Soeley on topic Technical Tyre Question
The one circled in red would leave about 4mm of thread depth. Could it be an 'Off Road' tread wear indicator? Obviously for off road use you don't really want to get down to 1.6mm. So do AT tyres have two wear marker indicators, one for minimum road legal limit and one for minimum off road grip/performance?
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Time to create page: 0.171 seconds