A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
1999 Suzuki Jimny (JB23w) 660 Turbo Gauge install help plz
12 Dec 2022 00:26 #246314
by Matt889
Can someone Please help me? I have purchased a turbo gauge for my Jimny but I don't know what line I should put the T-fitting into to read the turbo levels, I have a feeling my turbo is not working but I don't have a way to test or diagnose it without seeing it on the turbo gauge. Appreciate any help!
Please Log in or Create an account to join the conversation.
12 Dec 2022 00:29 #246315
by Matt889
Replied by Matt889 on topic 1999 Suzuki Jimny (JB23w) 660 Turbo Gauge install help plz
Please Log in or Create an account to join the conversation.
12 Dec 2022 16:00 - 12 Dec 2022 16:04 #246325
by fordem
Replied by fordem on topic 1999 Suzuki Jimny (JB23w) 660 Turbo Gauge install help plz
Last edit: 12 Dec 2022 16:04 by fordem. Reason: image didn't upload correctly
Please Log in or Create an account to join the conversation.
12 Dec 2022 19:42 #246331
by Matt889
Replied by Matt889 on topic 1999 Suzuki Jimny (JB23w) 660 Turbo Gauge install help plz
Please Log in or Create an account to join the conversation.
13 Dec 2022 00:08 #246341
by fordem
Replied by fordem on topic 1999 Suzuki Jimny (JB23w) 660 Turbo Gauge install help plz
That is where I'm suggesting it might be possible to fit it.
Remove the pressure sensor and disconnect the tube, blow through the tube fitting and see if the air comes out of the pressure sensor port - if it does - fit the tee there.
Remove the pressure sensor and disconnect the tube, blow through the tube fitting and see if the air comes out of the pressure sensor port - if it does - fit the tee there.
Please Log in or Create an account to join the conversation.
Time to create page: 0.134 seconds