× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Engine conversion from m13a to an auto Liana m16a flywheel wont fit.

Start
Prev
1
Next
End

jeremyrfk
Topic Author
Visitor
Public

27 Aug 2021 00:57 - 27 Aug 2021 00:58 #237917 by jeremyrfk

Engine conversion from m13a to an auto Liana m16a flywheel wont fit. was created by jeremyrfk

Converting a 2001 jimny m13a to an m16a from a 2002 automatic liana and found the m13a flywheel won't bolt onto the m16a. Anyone done this conversion and how'd you get around it? Cheers.

Last edit: 27 Aug 2021 00:58 by jeremyrfk. Reason: Add Icon

Please Log in or Create an account to join the conversation.

Keithy
Offline
Platinum Member
Registered

28 Aug 2021 08:37 #237946 by Keithy

Replied by Keithy on topic Engine conversion from m13a to an auto Liana m16a flywheel wont fit.

Any pictures of the crank and drive plate also the flywheel.......I put a manual M16 into an auto jimny with no issue.

Please Log in or Create an account to join the conversation.

j999pre
Offline
Platinum Member
Registered

28 Aug 2021 09:27 #237948 by j999pre

Replied by j999pre on topic Engine conversion from m13a to an auto Liana m16a flywheel wont fit.

Make sure you remove the spacer from the end of the crank

Gold Jimny the best colour (sold)

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

jeremyrfk
Topic Author
Visitor
Public

30 Aug 2021 05:20 #238006 by jeremyrfk

Replied by jeremyrfk on topic Engine conversion from m13a to an auto Liana m16a flywheel wont fit.

That was it! Thanks mate

Please Log in or Create an account to join the conversation.

Dirtbird
Visitor
Public

30 Aug 2021 20:50 #238035 by Dirtbird

Replied by Dirtbird on topic Engine conversion from m13a to an auto Liana m16a flywheel wont fit.

Mad your sorted

Please Log in or Create an account to join the conversation.

Dured
Offline
New Member
Registered

09 Nov 2021 08:10 - 09 Nov 2021 09:51 #239958 by Dured

Replied by Dured on topic Engine conversion from m13a to an auto Liana m16a flywheel wont fit.

Encountered similar problem while trying to fit Jimny M13A Automatic flywheel on to a Liana M16A (both non VVT) ex-manual engine, but the center bore diameter seemed to be larger on the Jimny flywheel.
But I can confirm there is a flange on the engine crankshaft for those with automatic gearbox, which is not present for manuals with thicker flywheel! So take the flange off m13 auto and use it on the m16 engines crankshaft together with the m13 automatic flywheel!