×
Fully Floating Rear Axle Kit (20 Oct 2021)
Brett and Riccy are please to announce the
G&D Floating Axle Kit
This add-in kit enables you to enhance your Gen3 Jimny to a fully floating rear axle
Full details are in the download file below
DOWNLOAD DETAILS HERE
G&D Floating Axle Kit
This add-in kit enables you to enhance your Gen3 Jimny to a fully floating rear axle
Full details are in the download file below
DOWNLOAD DETAILS HERE
×
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Re:Re:Fuel lines
Less
More
- Posts: 1136
- Thank you received: 151
- Points: 373.00
31 May 2021 18:03 #235503
by mickt
Fuel lines was created by mickt
2002 model and the pressure fuel line has sprung a leak plus the other two are rusted/pitted. Any idea where the 5 section clamps can be bought as no doubt they will shatter being plastic and 19 years old?
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 7348
- Thank you received: 1494
- Points: 27096.00
-
31 May 2021 18:12 #235504
by Lambert
Temeraire (2018 quasar grey automatic)
The last of the gen3s, probably.
Replied by Lambert on topic Fuel lines
Give Martin in the shop above a shout, he should be able to help.
Temeraire (2018 quasar grey automatic)
The last of the gen3s, probably.
Please Log in or Create an account to join the conversation.
01 Jun 2021 06:31 - 01 Jun 2021 06:32 #235512
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Fuel lines
Hi
The fully preformed piping is available but being very long and very thin will not survive the postal service.
Some people have made them up from brake piping
The little plastic pipe mounts are available
Martin
Sent from my moto g(8) power using Tapatalk
The fully preformed piping is available but being very long and very thin will not survive the postal service.
Some people have made them up from brake piping
The little plastic pipe mounts are available
Martin
Sent from my moto g(8) power using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 01 Jun 2021 06:32 by mlines.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1136
- Thank you received: 151
- Points: 373.00
01 Jun 2021 17:53 #235523
by mickt
Replied by mickt on topic Re:Fuel lines
The plastic pipe mounts you mention, are these the original 5 space ones and if so where do you get them from?
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1136
- Thank you received: 151
- Points: 373.00
01 Jun 2021 19:23 - 01 Jun 2021 19:24 #235528
by mickt
Replied by mickt on topic Re:Fuel lines
There is 6x5 pipe and 2 x3 pipe on the car. I have a spare set of pipes on my other car but will be just replacing the back half with in line connections. I am just trying to anticipate problems for the garage to solve!
Last edit: 01 Jun 2021 19:24 by mickt.
Please Log in or Create an account to join the conversation.
01 Jun 2021 19:25 #235530
by mlines
Sent from my moto g(8) power using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Re:Fuel lines
Me!The plastic pipe mounts you mention, are these the original 5 space ones and if so where do you get them from?
Sent from my moto g(8) power using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1136
- Thank you received: 151
- Points: 373.00
02 Jun 2021 10:29 #235543
by mickt
Replied by mickt on topic Re:Re:Fuel lines
OK then how much for the 8?
Please Log in or Create an account to join the conversation.
02 Jun 2021 14:20 #235550
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Re:Fuel lines
There are three different mounts spread along the chassis
One is clearly not the one you want as it does not have many pipe positions on it
The other two mounts are:
£6.17 each or
£4.46 each depending on which you want.
Martin
One is clearly not the one you want as it does not have many pipe positions on it
The other two mounts are:
£6.17 each or
£4.46 each depending on which you want.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1136
- Thank you received: 151
- Points: 373.00
07 Jun 2021 10:04 #235644
by mickt
Replied by mickt on topic Re:Re:Fuel lines
Any luck with these mounts/ Also I am after the exhaust bolts that connect the front exhaust to the middle exhaust pipes if possible.
Please Log in or Create an account to join the conversation.
07 Jun 2021 10:15 #235645
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Re:Fuel lines
Did you choose which mount you wanted from the picture I sent?
Martin
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1136
- Thank you received: 151
- Points: 373.00
07 Jun 2021 10:23 #235646
by mickt
Replied by mickt on topic Re:Re:Fuel lines
I mentioned that the two three pipe mounts are for the front part as the pipes rise into the engine bay. The other 6 consist of four mounted vertically to the chassis rail and two horizontally floating as it were in the awkward channels. These are the five pipe ones The pictures I found difficult to interperate.
Please Log in or Create an account to join the conversation.
Time to create page: 0.181 seconds