A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Chassis variations (JB74 - new Jimny)

More
11 Oct 2019 13:05 #214608 by mlines
This has been asked of me and is a mystery.

The UK ( possibly EU and Japan) market has the box and ring attachments on the chassis. These also appear in the pre launch pictures of the bare chassis.

However they DO NOT appear in other markets and mean that some accessories from other markets do not fit.

Any idea what they do? (and are they on the SZ4 as I only have SZ5s to compare with). The box has a rubber like filler. It's it some sort of harmonic damper, if so why don't other markets have it.

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
11 Oct 2019 15:29 #214620 by Soeley
I had wondered what they were there for, but didn't know not all Jimnys had them. Makes it an even bigger mystery?

Please Log in or Create an account to join the conversation.

More
11 Oct 2019 15:40 #214621 by mlines
It seems that South Africa doesn't have then

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
11 Oct 2019 16:10 #214623 by mlines
A couple of pictures from Suzuki showing the variation. I think one is a Kei chassis but South Africa does not have Kei models

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • Lambert
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
11 Oct 2019 16:22 #214624 by Lambert
Might rings be a manufacturing artefact? Don't know what the boxes are for?

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
11 Oct 2019 17:25 #214625 by Soeley

Lambert wrote: Might rings be a manufacturing artefact? Don't know what the boxes are for?


Do you mean as in tooling/jig holes? I would have thought they would use the chassis/body mount hole for that? And if they are doesn't make sense they would remove them for some markets. If the boxes are for no beneficial purpose, it seems they have just built in some rust traps?

Please Log in or Create an account to join the conversation.

Time to create page: 0.158 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.