×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - EARLY BIRD DISCOUNTED PRICE

Click HERE for details

× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

26spline front arb?

More
25 Oct 2017 07:21 #185496 by orisuli
26spline front arb? was created by orisuli
There is any front locker with 26 spline side gears?

I bought buy mistake and rd208... and find out its the right one for the front.

Is there any option to put it in high pinion third member ?
Or just replace it to rd206 ? And if so whats the part number for 26 spline side gears?

Sent from my SM-G900F using Tapatalk

Please Log in or Create an account to join the conversation.

More
25 Oct 2017 08:15 #185497 by zukebob
Replied by zukebob on topic 26spline front arb?
You need to use the rd206. If you are in the UK, Jimnybits sells the 26 spline gears.

I started out with nothing & still have most of it left

Please Log in or Create an account to join the conversation.

More
25 Oct 2017 11:33 #185503 by orisuli
Replied by orisuli on topic Re:26spline front arb?
Thanks!

There is no arb part number so i can keep my warranty on the locker?

Sent from my SM-G900F using Tapatalk

Please Log in or Create an account to join the conversation.

More
25 Oct 2017 23:54 #185522 by zukebob
Replied by zukebob on topic Re:26spline front arb?
I'm not sure if you are asking about the part number for the gear set. If you are, it is a 6 piece gear set, part number 728JA12. As far as the warranty goes, I'm not sure what effect a change would cause. You would need to read the terms in the warranty that came with the locker.

I started out with nothing & still have most of it left

Please Log in or Create an account to join the conversation.

  • Riccy
  • Riccy's Avatar
  • Offline
  • Banned
  • Banned
    Registered
  • J999 MNY Bashing around Carlisle
More
26 Oct 2017 06:25 #185524 by Riccy
Replied by Riccy on topic Re:26spline front arb?
Trailgear make 22 spline HD shafts, which is what i use with my ARBs (rd 207 and rd 208 i think). Might be an easier and cheaper option than changing the side gears.

Jimnybits do genuine ARB side gears as well as generic ones, so genuine should maintain the warranty (but are pricey)

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

  • Ronstan
  • Visitor
  • Visitor
    Public
28 Dec 2017 12:13 - 28 Dec 2017 12:19 #187830 by Ronstan
Replied by Ronstan on topic Re:26spline front arb?
Can you clarify what is the story with the side gears?
If I want to have front ARB locker (RD206/207) with 26 spline I need to get side gears (728JA12) and fit them into the locker instead the original ones? Is that correct?
When I checked this 728JA12 on website it says that it's for RD208, so will it fit to RD206/207 as well?
Last edit: 28 Dec 2017 12:19 by Ronstan.

Please Log in or Create an account to join the conversation.

More
28 Dec 2017 12:59 #187832 by jackonlyjack
Replied by jackonlyjack on topic Re:26spline front arb?
The 26 spline side gears are to use with heavy duty shafts
standard shafts have 22 splines
You can use rear diff side gears in the front as these have 26 splines
Hope this helps in some way ;)

Jack

Please Log in or Create an account to join the conversation.

  • Ronstan
  • Visitor
  • Visitor
    Public
28 Dec 2017 14:00 #187835 by Ronstan
Replied by Ronstan on topic Re:26spline front arb?
Yes, so it's possible to fit rear side gears into front diff and that applies to orginal parts.
The question was about ARB diff locker.
I am aware I can buy HD 22 spline shafts but I would rather prefer 26 ones. Especially with difflock.

Please Log in or Create an account to join the conversation.

  • TomDK
  • Visitor
  • Visitor
    Public
28 Dec 2017 20:35 #187853 by TomDK
Replied by TomDK on topic Re:26spline front arb?
I think you guys are misunderstanding eachother a bit.

There is no 26 spline front locker made for the Jimny front axle by ARB. The only way of doing this is by using side gears from ARB rear locker in the front locker as they fit.

This just to clarify how it's done. When it comes to warranty it's up to the retailer. Probably where you got the locker.

Please Log in or Create an account to join the conversation.

  • Ronstan
  • Visitor
  • Visitor
    Public
29 Dec 2017 03:42 #187860 by Ronstan
Replied by Ronstan on topic Re:26spline front arb?

TomDK wrote: ...The only way of doing this is by using side gears from ARB rear locker in the front locker as they fit. ...


Thanks! That's the answer I was looking for :)

Please Log in or Create an account to join the conversation.

Time to create page: 0.149 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.