A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Procomp shock rubber
05 Dec 2008 17:41 #292
by DTC
Procomp shock rubber was created by DTC
Hello, i'm wondering would anyone know where i could get rubber or poly bushes for 4" lifted procomp shocks. I need to replace the rubber on the mounts connected to the axle on all four shocks. Any help would be greatly appreciated.
Please Log in or Create an account to join the conversation.
05 Dec 2008 19:39 #293
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Procomp shock rubber
I use "Bits4vits" - see
www.bits4vits.co.uk
I know Dave (Bits4vits) talked at one point about stopping making Polybushes but his website seems to have more again. As they are really Vitara ones you may find that they need a small bit of trimming, mine did - I clamped them in a vice and used a junior hacksaw it was so quick and easy.
Martin
I know Dave (Bits4vits) talked at one point about stopping making Polybushes but his website seems to have more again. As they are really Vitara ones you may find that they need a small bit of trimming, mine did - I clamped them in a vice and used a junior hacksaw it was so quick and easy.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
05 Dec 2008 19:43 #294
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Procomp shock rubber
Oh and how about some pictures of your Jimny?
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
05 Dec 2008 19:50 #295
by DTC
Replied by DTC on topic Re:Procomp shock rubber
These chaps here is it?
cgi.ebay.co.uk/Suzuki-Vitara-Shock-Absor...sidZp1742.m153.l1262
Haven't had a chance to take her off road yet as she's not passed her nct (Irish mot) and its a good distance to the nearest off road track so i haven't taken many pics.
cgi.ebay.co.uk/Suzuki-Vitara-Shock-Absor...sidZp1742.m153.l1262
Haven't had a chance to take her off road yet as she's not passed her nct (Irish mot) and its a good distance to the nearest off road track so i haven't taken many pics.
Please Log in or Create an account to join the conversation.
05 Dec 2008 19:56 #296
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Procomp shock rubber
Thats the correct website, but you may have to speak to Dave to get the correct ones.
The ones in the picture you referenced are for shock absorbers that have Pins on top and Rings on the bottom - which is ok for the front ones on a Jimny. But the rear ones on my Jimny have Rings top and bottom. In the past Dave has posted the set that you want, drop him an email.
Martin
The ones in the picture you referenced are for shock absorbers that have Pins on top and Rings on the bottom - which is ok for the front ones on a Jimny. But the rear ones on my Jimny have Rings top and bottom. In the past Dave has posted the set that you want, drop him an email.
Martin
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
05 Dec 2008 20:01 #297
by DTC
Replied by DTC on topic Re:Procomp shock rubber
Grand, thanks for the info. I'll drop him a line so
Please Log in or Create an account to join the conversation.
Time to create page: 0.145 seconds