× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Broken gear stick spring (2007/gen3)

Start
Prev
1
Next
End

CJ Davies
Topic Author
Offline
New Member
Registered

24 Sep 2021 10:17 #238928 by CJ Davies

Broken gear stick spring (2007/gen3) was created by CJ Davies

The conical spring at the base of the shaft of my gear stick has snapped. It's the spring that sits beneath a metal collar, beneath both rubber boots. It still shifts fine, but the 2>3 shift in particular is very sloppy & I have to be quite careful to get it right. From what I've managed to glean, I should be able to rotate the collar CCW to release it, then I should be able to replace the spring.

Can anybody confirm this & whether I need a specific part, or whether any generic spring of similar dimensions/firmness will do the job?

Please Log in or Create an account to join the conversation.

Start
Prev
1
Next
End

Time to create page: 0.086 seconds

Search

Fast Font

Broken gear stick spring (2007/gen3)

The Legal Stuff