×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Re:Steel rims
Less
More
- Posts: 44
- Thank you received: 1
- Points: 149.00
25 Jan 2021 18:13 #232177
by Lasse
Steel rims was created by Lasse
hey everyone
What ET number can be fitted to a gen 4 with a 2" lift without the tyres are rubbing against something.?
thanks ..
What ET number can be fitted to a gen 4 with a 2" lift without the tyres are rubbing against something.?
thanks ..
Please Log in or Create an account to join the conversation.
25 Jan 2021 18:26 #232178
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Steel rims
Depends on the tyres as much as the rims
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 44
- Thank you received: 1
- Points: 149.00
25 Jan 2021 22:17 #232183
by Lasse
Replied by Lasse on topic Re:Steel rims
Thinking 215/75-15
The 235 is given a lot of smoke for being to big and make the car slow - but looks pretty awesome with the big Tyres..!
The 235 is given a lot of smoke for being to big and make the car slow - but looks pretty awesome with the big Tyres..!
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8244
- Thank you received: 1641
- Points: 32881.00
-
26 Jan 2021 05:02 - 26 Jan 2021 05:04 #232192
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
Replied by Lambert on topic Re:Steel rims
Couple of assumptions the tyre is not a remoulded one and also is not a massive tread extreme type. Then the standard 5.5j et5 15 inch wheel will accommodate a 215.75 on standard height suspension. An after market wheel is most likely going to be wider so 6j or 7j and is probably going to be either et0 or a negative et and combining the two will possibly cause rubbing but how much is contingent on the age and condition of the suspension and how much it has settled over time.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
Last edit: 26 Jan 2021 05:04 by Lambert.
Please Log in or Create an account to join the conversation.
03 Feb 2021 09:49 #232438
by B3Hulk
Jimny 2019 - Gen 4 - AU - Useful Links - Instagram: B3Hulk
Replied by B3Hulk on topic Re:Steel rims
Negative 13 offset with 215/75/r15 no rub with it flush against the body.
Jimny 2019 - Gen 4 - AU - Useful Links - Instagram: B3Hulk
Please Log in or Create an account to join the conversation.
Time to create page: 0.279 seconds