A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Gen4 Intermittent Rear Wiper
26 Aug 2020 20:46 #227383
by Soeley
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Gen4 Intermittent Rear Wiper was created by Soeley
This is probably a long shot, but worth asking.
The Gen4 does not come with variable intermittent front wipers and the rear wiper is either on or off. A quick and simple Mod is to swap the whole stalk for one from a 2017 onwards Swift or similar, and that gives you a variable front wiper. However even though the Swift stalk has an intermittent mode for the rear wiper, this has no effect on the Gen4.
I was wondering if comparing wiring diagrams for a 2017 swift and Gen4 would highlight a difference, could it be as simple as adding a wire from the stalk connector to the wiper motor fix this, or simply swapping the rear motor for a swift one (if it will fit).
Any body got any diagrams that could shed any light on this?
To me having the rear wiper on constant seems daft, by default intermittent would have been better.
The Gen4 does not come with variable intermittent front wipers and the rear wiper is either on or off. A quick and simple Mod is to swap the whole stalk for one from a 2017 onwards Swift or similar, and that gives you a variable front wiper. However even though the Swift stalk has an intermittent mode for the rear wiper, this has no effect on the Gen4.
I was wondering if comparing wiring diagrams for a 2017 swift and Gen4 would highlight a difference, could it be as simple as adding a wire from the stalk connector to the wiper motor fix this, or simply swapping the rear motor for a swift one (if it will fit).
Any body got any diagrams that could shed any light on this?
To me having the rear wiper on constant seems daft, by default intermittent would have been better.
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Please Log in or Create an account to join the conversation.
26 Aug 2020 21:04 #227386
by Soeley
Are you RM on Suzuki Jimny JB74 UK, just something similar was said on there, but not a clue what the BCM is?
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Replied by Soeley on topic Re:Gen4 Intermittent Rear Wiper
crash486 wrote: I have been told the rear wiper is controlled by the bcm (body control module) so more difficult to hack something together.
crash486 JB74W
Are you RM on Suzuki Jimny JB74 UK, just something similar was said on there, but not a clue what the BCM is?
Black 2019 Jimny SZ5
www.bigjimny.com/index.php/forum/8-my-ji...ley-s-2019-black-sz5
Please Log in or Create an account to join the conversation.
Time to create page: 0.149 seconds