×
Fully Floating Rear Axle Kit (20 Oct 2021)

Brett and Riccy are please to announce the

G&D Floating Axle Kit

This add-in kit enables you to enhance your Gen3 Jimny to a fully floating rear axle

Full details are in the download file below

DOWNLOAD DETAILS HERE

File Attachment:

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

E10 Fuel in the UK

More
05 Mar 2020 20:50 #219439 by petejones69
Not seen anything on the forum about the proposed new E10 fuel in the UK. I'm guessing my 1999 engine will be knackered by it as the RAC are saying any vehicle older than 2002 will be affected.

www.rac.co.uk/drive/advice/emissions/wha...could-it-affect-you/

Pete

1999 Jimny with 3" lift, Redacted transfer box, under-body protection, Cooper STTs and folding cup holders...

Please Log in or Create an account to join the conversation.

More
05 Mar 2020 21:06 #219442 by Reason2doubt
Replied by Reason2doubt on topic E10 Fuel in the UK
I had heard about this, same situation for me - 1999 G13B engine might take a bit of a hit with this, if this and other articles are anything to go by.

Please Log in or Create an account to join the conversation.

More
05 Mar 2020 21:29 #219445 by mlines
Replied by mlines on topic Re:E10 Fuel in the UK
I have put in a technical question and will let you know when I get a response

Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: gusthegorilla, petejones69, Keirravn, Reason2doubt, GeezerDan, Mr CC

Please Log in or Create an account to join the conversation.

More
07 Mar 2020 10:47 #219539 by mlines
Replied by mlines on topic Re:E10 Fuel in the UK
Just had it confirmed.

E10 is fine in both new and old Jimnys

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: Lambert, gusthegorilla, jackonlyjack, petejones69, Reason2doubt, GeezerDan, Mr CC

Please Log in or Create an account to join the conversation.

More
07 Mar 2020 11:50 #219542 by reedx
Replied by reedx on topic Re:E10 Fuel in the UK
Funnily enough I just noticed last night that my Gen4 fuel filler cap lists both E5 and E10. Hadn't noticed the proposal to move the UK to E10.

Colin

Please Log in or Create an account to join the conversation.

More
07 Mar 2020 12:05 #219545 by petejones69
Replied by petejones69 on topic E10 Fuel in the UK
That's good news, thanks very much.

1999 Jimny with 3" lift, Redacted transfer box, under-body protection, Cooper STTs and folding cup holders...

Please Log in or Create an account to join the conversation.

More
07 Mar 2020 15:12 #219552 by Reason2doubt
Replied by Reason2doubt on topic E10 Fuel in the UK
Excellent news - long live the Jimny!

Please Log in or Create an account to join the conversation.

More
08 Mar 2020 07:02 #219580 by kirkynut
Replied by kirkynut on topic E10 Fuel in the UK
Thank you Martin. I've just read about this in the news, had a little panic as I've just sold a 2003 car to drive my 2000 Jimny daily and then that news!

I can rest easy now then!

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

More
18 Jul 2021 15:40 #236780 by Tasker
Replied by Tasker on topic E10 Fuel in the UK
Martin,

excuse my ignorance but who confirmed it and is there any chance we can see said confirmation.

I have an elderly father that is concerned about my 2004 Jimny and is being stubborn about my "She'll be alreet" attitude :)

Cheers

Tris

Please Log in or Create an account to join the conversation.

More
18 Jul 2021 17:02 #236784 by mlines
Replied by mlines on topic E10 Fuel in the UK
Suzuki Technical Support - I have the ability to put in technical questions

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
18 Jul 2021 17:16 #236785 by Busta
Replied by Busta on topic E10 Fuel in the UK
It's written in your Jimny handbook on page 1-1
"Belnds of unleaded petrol and ethanol are commercially available in some areas. Blends of this type may be used in your vehicle if they are no more than 10% ethanol."

Please Log in or Create an account to join the conversation.

More
19 Jul 2021 06:07 #236793 by mlines
Replied by mlines on topic Re:E10 Fuel in the UK
As busta stated and as I confirmed with Suzuki technical

Sent from my moto g(8) power using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

Time to create page: 0.150 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.