A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

Gen3 roof cross bars

  • Lambert
  • Topic Author
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
18 Jul 2019 05:43 #211221 by Lambert
Gen3 roof cross bars was created by Lambert
Whatcha. I don't have the factory roof rails anymore and it is good. However I have need to carry a selection of hurdles for penning seeps. I have trailers but they are not always convenient. Before I head for halfords with a tape measure has anyone found a set of feet for normal bars that have the same twin bolt pattern as the existing studs on the roof of a gen3, save me looking in every box?

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
21 Oct 2023 17:19 #251620 by Bosanek
Replied by Bosanek on topic Gen3 roof cross bars
I am on a similar quest as you and I have found this forum topic which might (in a way) offer a similar solution:
www.bigjimny.com/index.php/forum/6-jimny...ith-roof-bars#217094

It is not a straight bolt-on solution as it requires some modifications to be performed.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Topic Author
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
21 Oct 2023 20:14 #251632 by Lambert
Replied by Lambert on topic Gen3 roof cross bars
After an interim solution similar to the lin I have now gone custom stainless. 

 

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

Time to create page: 0.170 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.