× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

What did the postman bring today

More
15 Dec 2019 21:08 #216498 by Soeley
I looked at their Explorer 200 RTT at the Overland Adventure show this year. they look a well made bit of kit.

Please Log in or Create an account to join the conversation.

More
16 Dec 2019 09:05 #216506 by Reason2doubt
Yes that is the one I was looking at originally.

He posted up on his facebook page a little while ago that he was selling his demo 310 tent with annex and it came to the same price as the explorer.

I am just waiting for a nice day to put it up now, as it's rained every day since I got it!!

Please Log in or Create an account to join the conversation.

More
16 Dec 2019 09:07 #216507 by Soeley
Proper bargain, well done!

Please Log in or Create an account to join the conversation.

More
19 Dec 2019 12:27 #216582 by mlines
Set of new bearings for my RockLobster build.



Sent from my Pixel 2 XL using Tapatalk

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
19 Dec 2019 15:33 #216585 by jackonlyjack
Where did you get the bearings from Martin ?
Will need some next year

Please Log in or Create an account to join the conversation.

More
19 Dec 2019 16:08 #216587 by mlines

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

More
19 Dec 2019 18:12 #216592 by jackonlyjack

Please Log in or Create an account to join the conversation.

  • CC Baxter
  • Visitor
  • Visitor
    Public
10 Jan 2020 19:53 #217157 by CC Baxter
Replied by CC Baxter on topic Re:What did the postman bring today
Gadget, Did you ever get around to fitting the JB front recovery points. I was looking for a good photo of it fitted but before the bumper goes back on. I think it might form the basis of a front mounted tow hitch. I've seen the JB Facebook picture of the winch plate but for my taste it requires to much bumper cutting.
Many thanks, Chris

Please Log in or Create an account to join the conversation.

More
27 Jan 2020 14:23 - 27 Jan 2020 14:55 #217741 by yakuza
Happy days!



The Norwegian Suzuki club members were offered the obsolete parts from the suzuki importer at low prices before they scrapped it They throw out loads of parts to make room for EV parts.

Loads of stuff! Feel like a kid on Christmas..

Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Attachments:
Last edit: 27 Jan 2020 14:55 by yakuza.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
27 Jan 2020 15:27 #217743 by Lambert
You lucky boy, what a win! Hopefully they didn't charge you full retail.

Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
ADOS Attention Deficit Ooooh Shiny!

Please Log in or Create an account to join the conversation.

More
27 Jan 2020 16:01 #217744 by yakuza

Lambert wrote: You lucky boy, what a win! Hopefully they didn't charge you full retail.

100 or so in your currency.. Insane.

Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.

Please Log in or Create an account to join the conversation.

More
27 Jan 2020 16:06 - 27 Jan 2020 16:07 #217745 by mlines
Proper armrests for the GEn4 and GEN3 Jimnys, should be in the store tomorrow. On seat fitting as they would be if Suzuki did them. Exactly like they would be OEM they adjust up and down and slide with the seat.

Open up to reveal handy cubby.





See below for them placed (not fitted!) in a 2019 Swift



Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Attachments:
Last edit: 27 Jan 2020 16:07 by mlines.

Please Log in or Create an account to join the conversation.

Time to create page: 0.261 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.