bike exhaust

Hi guys looking to put a motorbike exhaust on the jim as im bored of the standard note. Anyone know what bore i will need and where i can get a cheap can from doesnt need to be new thanks

The standard pipe is 44mm but its the flange you need unless you cut it off

I can take the flange and clamp the can to the pipe yeah?

Got a couple of cans don't know if they will be any use? One's a standard GSXR600 can off a 04 model and the others a WR450 can. Free if you pick them up

barnes wrote: I can take the flange and clamp the can to the pipe yeah?

Try to get a slip on can, it keeps things simple. If you get a race can your jimny will be very loud even if you fit a db killer so if you don't want to sound like a corsa with a straight through 3" pipe you will be better off with a road legal can. I tried a devil race can with a baffle in and it was loud so I fitted a Harris can which is road legal and it reasonably quiet but still louder than the std exhaust. Once you have the can measure the inside bore, probably 2" and the outside diameter of the pipe you are connecting it too. You can then order a exhaust clamp on connector pipe off eBay.

Thanks for the help all! Nope i dont want a corsa sound lol bigmat where abouts you based fella?

Just pull the rear can and pipe straight from the cat

barnes wrote: Thanks for the help all! Nope i dont want a corsa sound lol bigmat where abouts you based fella?

Here is a pic if that helps

you could at least of got a carbon can

barnes wrote: Thanks for the help all! Nope i dont want a corsa sound lol bigmat where abouts you based fella?

Huddersfield, West Yorks mate

GWR wrote:

barnes wrote: Thanks for the help all! Nope i dont want a corsa sound lol bigmat where abouts you based fella?

Here is a pic if that helps

Have you had the car through an mot with that in place? A genuine question as i had a car where the exhaust finished short of the bumper and it had to be extended due to the risk of fumes bleeding through into the cabin.

mcjimny wrote:

GWR wrote:

barnes wrote: Thanks for the help all! Nope i dont want a corsa sound lol bigmat where abouts you based fella?

Here is a pic if that helps

Have you had the car through an mot with that in place? A genuine question as i had a car where the exhaust finished short of the bumper and it had to be extended due to the risk of fumes bleeding through into the cabin.

Not yet, I think it will be ok it exists into the wheel well, but we will see when it's due