×
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Re:What did you do to your jimny today?
16 Jan 2022 21:02 - 16 Jan 2022 21:03 #241228
by thieuster
Chronologically:
- 1959 Triumph TR3A
- 1970 Saab 96V4
- 1973 Saab 95V4
- 2001 Suzuki Jimny
- 2020 Honda CR-V Hybrid 4x4
Gone:
- 1973 Porsche 914
- 1993 Suzuki Samurai
New:
- 1991 Peugeot 205 automatic with < 60K miles!
Replied by thieuster on topic What did you do to your jimny today?
I took out the broken-off antenna and replaced it with a new one. With the aid of a YT 'how to' video I'd found, it was a 5 min. job!
Then I installed a new clock. The old one was broken but I managed to source a new one. And I installed a new radio. I needed the correct ISO loom for the new radio. I found out that Honda used the same item in their older cars. My wife drives a CR-V and the dealer is close. So I jumped in the Jimny, drove to the dealer and asked if they were willing to rummage through their old stock. And yes! They found the 'missing link'. FoC! Nice.
The installation of the radio (Blaupunkt) was easy. But I notice that the LH speaker is 'dead'. I already had the intention of upgrading the front speakers. But now it's certain that I will do that in the near future.
Menno
Then I installed a new clock. The old one was broken but I managed to source a new one. And I installed a new radio. I needed the correct ISO loom for the new radio. I found out that Honda used the same item in their older cars. My wife drives a CR-V and the dealer is close. So I jumped in the Jimny, drove to the dealer and asked if they were willing to rummage through their old stock. And yes! They found the 'missing link'. FoC! Nice.
The installation of the radio (Blaupunkt) was easy. But I notice that the LH speaker is 'dead'. I already had the intention of upgrading the front speakers. But now it's certain that I will do that in the near future.
Menno
Chronologically:
- 1959 Triumph TR3A
- 1970 Saab 96V4
- 1973 Saab 95V4
- 2001 Suzuki Jimny
- 2020 Honda CR-V Hybrid 4x4
Gone:
- 1973 Porsche 914
- 1993 Suzuki Samurai
New:
- 1991 Peugeot 205 automatic with < 60K miles!
Last edit: 16 Jan 2022 21:03 by thieuster.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 505
- Thank you received: 82
- Points: 2592.00
-
16 Jan 2022 21:33 #241230
by Dirtbird
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Replied by Dirtbird on topic What did you do to your jimny today?
check the balance on the radio then check the power plug to the speaker, could be that simple.
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Please Log in or Create an account to join the conversation.
16 Jan 2022 21:51 #241233
by thieuster
Chronologically:
- 1959 Triumph TR3A
- 1970 Saab 96V4
- 1973 Saab 95V4
- 2001 Suzuki Jimny
- 2020 Honda CR-V Hybrid 4x4
Gone:
- 1973 Porsche 914
- 1993 Suzuki Samurai
New:
- 1991 Peugeot 205 automatic with < 60K miles!
Replied by thieuster on topic What did you do to your jimny today?
Thanks! As a matter of fact, I did check the balance when I was going through the manual of the newly installed radio. I did not check the plug to the speaker. The wiring under the dash is completely original and unmolested(!), so the chance that the wiring fails at the connector-side is rather small. I'll take off the plastic cover in the footwell and see if I can find something odd there.
Chronologically:
- 1959 Triumph TR3A
- 1970 Saab 96V4
- 1973 Saab 95V4
- 2001 Suzuki Jimny
- 2020 Honda CR-V Hybrid 4x4
Gone:
- 1973 Porsche 914
- 1993 Suzuki Samurai
New:
- 1991 Peugeot 205 automatic with < 60K miles!
Please Log in or Create an account to join the conversation.
16 Jan 2022 22:39 #241235
by louchy
2003 '53 Jimny JLX Mode
2" Suspension Lift
Modular Steel Wheels + Manual Hubs
BFG MT's
ARB Delete
Breathers (Diffs, Transfer Box, Gearbox)
Raptor 4x4 Snorkel
Jimnybits Armour (Diffs, Transfer Box, Fuel Tank, Shock Mounts, Rad Arms)
Front & Rear Recovery Points
Front & Rear Lightbars
Replied by louchy on topic What did you do to your jimny today?
Today I fitted a set of 200% brighter white H4 headlight bulbs, and a set of ultra bright LED side lights thanks to the recommendation from @Dirtbird
2003 '53 Jimny JLX Mode
2" Suspension Lift
Modular Steel Wheels + Manual Hubs
BFG MT's
ARB Delete
Breathers (Diffs, Transfer Box, Gearbox)
Raptor 4x4 Snorkel
Jimnybits Armour (Diffs, Transfer Box, Fuel Tank, Shock Mounts, Rad Arms)
Front & Rear Recovery Points
Front & Rear Lightbars
The following user(s) said Thank You: Dirtbird
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 505
- Thank you received: 82
- Points: 2592.00
-
16 Jan 2022 22:50 #241236
by Dirtbird
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Replied by Dirtbird on topic What did you do to your jimny today?
Are you happy with the results I know I was .
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
The following user(s) said Thank You: louchy
Please Log in or Create an account to join the conversation.
16 Jan 2022 22:54 #241237
by louchy
2003 '53 Jimny JLX Mode
2" Suspension Lift
Modular Steel Wheels + Manual Hubs
BFG MT's
ARB Delete
Breathers (Diffs, Transfer Box, Gearbox)
Raptor 4x4 Snorkel
Jimnybits Armour (Diffs, Transfer Box, Fuel Tank, Shock Mounts, Rad Arms)
Front & Rear Recovery Points
Front & Rear Lightbars
Replied by louchy on topic What did you do to your jimny today?
Are you happy with the results I know I was .
Very, it's like night and day
2003 '53 Jimny JLX Mode
2" Suspension Lift
Modular Steel Wheels + Manual Hubs
BFG MT's
ARB Delete
Breathers (Diffs, Transfer Box, Gearbox)
Raptor 4x4 Snorkel
Jimnybits Armour (Diffs, Transfer Box, Fuel Tank, Shock Mounts, Rad Arms)
Front & Rear Recovery Points
Front & Rear Lightbars
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 505
- Thank you received: 82
- Points: 2592.00
-
16 Jan 2022 23:01 #241238
by Dirtbird
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Replied by Dirtbird on topic What did you do to your jimny today?
Delighted for you mate. It also modernises your front as well. A couple of the lads here sware by Osram night breakers and to be fair it's a nice upgrade with a small expense or spend. I think i got the night breakers and the white 501 LEDs for under €40.
Are you out sitting in it now ???
Are you out sitting in it now ???
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
The following user(s) said Thank You: louchy
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 8261
- Thank you received: 1643
- Points: 32976.00
-
22 Jan 2022 18:35 #241414
by Lambert
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
Replied by Lambert on topic What did you do to your jimny today?
Today I have mostly been putting milage on Temeraire by going to the coast to get a set of spare wheels and tyres for the big meet. Thanks to gus the gorilla.
Temeraire (2018 quasar grey automatic)
One of the last 200ish of the gen3s, probably.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 505
- Thank you received: 82
- Points: 2592.00
-
23 Jan 2022 13:57 #241425
by Dirtbird
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Replied by Dirtbird on topic What did you do to your jimny today?
Decided I'd do the vacume hub by pass mod with a 10mm spacer in the hub. 40 mins later I now have dependable 4wd. Vacume was hit and miss last few days so until I get some euros together it will do.
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 505
- Thank you received: 82
- Points: 2592.00
-
23 Jan 2022 22:22 #241445
by Dirtbird
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Replied by Dirtbird on topic What did you do to your jimny today?
Did you get it working? CD on mine is fine but still no radio.
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 505
- Thank you received: 82
- Points: 2592.00
-
23 Jan 2022 22:25 #241446
by Dirtbird
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Replied by Dirtbird on topic What did you do to your jimny today?
Very happy with the cheap 10mm spacer in the hubs trick and got back out for a spin this evening to test it and really happy . On the down side broke one of the fog lights in the shed this evening righty vexed .........anyway have a good week lads.
Heavy Duty Transfer Box Brackets, 2-inch Black Raptor lift kit, caster adjusters, Rust removed and stich welded new sections. Galvanised Chassis. Body,Engine,transmission swap. Anti Rollbar Roll / Sway Bar / DAVES ARB disconnect kit.Osram Night Breaker Head light mod and white 501 led side lights.
Please Log in or Create an account to join the conversation.
26 Jan 2022 18:19 - 26 Jan 2022 18:20 #241516
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Re:What did you do to your jimny today?
Its time Geraldine has some grown up boots to wear.
Good job I checked the pressures when I left the tyre centre, I am not sure what they were thinking. Quite why they could not read the plate inside the door which are mandatory on all vehicles for the last few years I do not know?
Good job I checked the pressures when I left the tyre centre, I am not sure what they were thinking. Quite why they could not read the plate inside the door which are mandatory on all vehicles for the last few years I do not know?
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 26 Jan 2022 18:20 by mlines.
Please Log in or Create an account to join the conversation.
Time to create page: 0.545 seconds