×
BigJimnyMeet (North) 2024 (12 Jan 2024)


BigJimnyMeet 2024

14th July 2024
Parkwood Nr. Leeds

Booking now open - Discount for additional vehicles

Click HERE for details

× A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

eny pics off winchs in standed bumpers 8000lb

  • suzuki jimny fella
  • Topic Author
  • Visitor
  • Visitor
    Public
25 Feb 2012 20:59 #34217 by suzuki jimny fella
eny pics off winchs in standed bumpers 8000lb was created by suzuki jimny fella
as above

Please Log in or Create an account to join the conversation.

  • wanderinstar
  • Visitor
  • Visitor
    Public
16 Mar 2012 11:56 #35636 by wanderinstar

Please Log in or Create an account to join the conversation.

  • funkyjimny
  • funkyjimny's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • 2004 jimny soft top, factory hardtop, ARB bumper
More
16 Mar 2012 18:58 #35669 by funkyjimny
Mines similar to that, but my winch doesnt have a clutch lever on the top, so i managed to do mine a lot simpler, basically bolted a winch tray from a recovery truck on top of the chassis rails, lopped the edges off, rewelded them underneath at right angles. I then bolted down through the chassis rails and in through the side of the chassis rails. Rock solid.

Gary

Please Log in or Create an account to join the conversation.

More
17 Mar 2012 19:40 #35747 by jonplace
mines similar but number plate hides winch a bit

Please Log in or Create an account to join the conversation.

  • darthloachie
  • Visitor
  • Visitor
    Public
17 Mar 2012 20:51 #35759 by darthloachie
Replied by darthloachie on topic Re: eny pics off winchs in standed bumpers 8000lb
off road armory are about to launch a winch tray to fit behind a standard bumper

Please Log in or Create an account to join the conversation.

  • myers647
  • Visitor
  • Visitor
    Public
18 Mar 2012 14:51 #35797 by myers647
Hi mate I finally got round to fitting my winch this week end. I made my winch plate myself by cut the two front chassis legs off and welding two pieces of box section on the ends and some 6mm plate for the winch to sit on. I had fitted the 3 tonne Champion winch, which only just fits inside the standard bumper.It wouldnt take a bigger one unless you want to chop the bumper a lot. I wanted a nice neat job and its totaly behind the bumper and its not really visible apart from the fairlead. I will add some pictures tonight of the job start to finish.

Please Log in or Create an account to join the conversation.

Time to create page: 0.106 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.