If so you can have your own thread in this section.
This section on other websites has led to arguments and contention. People are posting pictures of their pride and joy and therefore CONSTRUCTIVE comments only please!
Project Sink or Swim
- Daniel30
- Visitor
-
Public
ZukracerV6 wrote:
Daniel30 wrote: How are you getting on with your build?
Hi all! Sorry about the delay in replying! Life has been very busy for both myself and Dutton! The build of the hull has been running late but the good news is, I'm collecting the hull this Friday!
Looking good what's next on the list or What stage is next??
It's impressive thanks for sharing
Please Log in or Create an account to join the conversation.
- ZukracerV6
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Daniel30
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Sponnie
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- ZukracerV6
- Topic Author
- Visitor
-
Public
A few pics of the progress...
A quick shot of the modified transfer case with the dog leg clutch and prop shaft to the jet drive. Sorry about the colours my phone does not like the bright yellow and flourecent lights in the man cave!
The engine bay
Modified steering box and steering box frame mount
And finally a close up of the steering box with the extra seal for where the steering arm will go through the hull
Please Log in or Create an account to join the conversation.
One problem I've noticed is that the Surf isn't looking so odd anymore!
I worked for Nissan a couple of decades back and a 100NX sat in the showroom for years....way ahead of it's time......they actually look contemporary now imho <txt spk from a 50 something
It's looking good and keep plodding away at it :beer:
Please Log in or Create an account to join the conversation.
- Daniel30
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- ZukracerV6
- Topic Author
- Visitor
-
Public
Just a quick picture of the front axle painted, and stripped of the vacuum lines and the adapter fitted to the breather for the breather tube. Once it's fitted, I have the manual hubs to fit later. The axle is now mounted and I will post some photos soon!
Please Log in or Create an account to join the conversation.
- Daniel30
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- 96volts
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- GraphicX
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- 96volts
- Visitor
-
Public
Please Log in or Create an account to join the conversation.