Placek's 33" Jimny

Overhead fuse and relay box is ready. On the vertical side there's also a water pump potentiometer. Fuse and relay slots are from BMW 5 series.

words cant express how much i appreciated the work going into this build!

We started to fit all the goodies to the dashboard.
To the left from the steering wheel are air compressor and front locker switches. Down from them are backup front and rear winch controller plugs in case the main switches at the dashboard failed.


In the center down from switches are two 150-1000A power swithes connected parallely which makes them together one 300-2000A switch (smart me )


Left clock shows the water temp near engine, right one near cooler, middle clock is the rpm meter, small square is voltmeter, big square is tripmeter (which has a repeater at passenger side). The red indicator goes on when oil pressure gets too low, green when the cooler fans turn automatically on, blue when 12V water pump turns automatically on. White is blank


Upper row from the left: ignition, led bar, left working led, right working led, rear working leds, manual water pump, manual fans 2nd speed.
Lower row: starter. front winch, rear winch, heater, inside leds, front handbrake valve, rear handbrake valve.
Above all there's a CB radio,


And thats how the exhaust pipe will go through the chassis



And a short clip what happens when I turn the main power switch and ignition on:

This is one of the best build threads by far . You seem to put the hours in and it surely shows ,Im almost certain it will be one of the best jimnys out there . I wouldn't know where to start with all that wiring .
Look forward to seeing this finished and hope u will be more than happy with it once finished

The video is cool. It does remind me of the DeLorean from back to the future though. Lol. I was half expecting dates to appear in the display.

It looks great and I enjoy catching up with your build when I'm online. Keep the updates coming.

1.21 gigawatts!!!

j999pre wrote: 1.21 gigawatts!!!

Yeah When I hit 80mph you gonna see some serious sh*t Hehehe

We're slowly getting to the end, Jimny should be ready next week.

Rollcage is on. We have to make a bullbar and paint the front bumper. Fender flares need trimming.


Some storage space on the back door There will aslo be a radiator cover.


New exhaust.


Interior.

Very nice

Very nice. Sorry if I missed it but what seats are you using?

Bloody love that :woohoo: :woohoo:

Thanks guys, I really appreciate it.

OllieNZ wrote: Very nice. Sorry if I missed it but what seats are you using?

No idea, I bought them on ebay. They were cheap