Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
1999 Jimny
- petejones69
- Topic Author
- Visitor
-
Public
12 Nov 2017 15:16 #186122
by petejones69
Replied by petejones69 on topic 1999 Jimny
Sorry, I took it all to the tip earlier today. They did look a bit knackered though to be honest.
Please Log in or Create an account to join the conversation.
- petejones69
- Topic Author
- Visitor
-
Public
13 Nov 2017 16:29 #186172
by petejones69
Replied by petejones69 on topic 1999 Jimny
This is the inside rear after removing the seats and carpet. Not too bad for an 18 year old Jimny!
Will rub down the bits of rust and seal/paint, then throw in a rubber mat.
Will rub down the bits of rust and seal/paint, then throw in a rubber mat.
Please Log in or Create an account to join the conversation.
- bowji john
- Visitor
-
Public
13 Nov 2017 16:32 - 13 Nov 2017 17:02 #186174
by bowji john
Replied by bowji john on topic 1999 Jimny
Looks nice
Hope mine turns out to be as clean
j
Hope mine turns out to be as clean
j
Last edit: 13 Nov 2017 17:02 by bowji john.
Please Log in or Create an account to join the conversation.
- Daniel30
- Visitor
-
Public
13 Nov 2017 16:52 #186175
by Daniel30
Replied by Daniel30 on topic 1999 Jimny
I would slap a bit of sound proofing down as well.
Please Log in or Create an account to join the conversation.
- 1066Boy
- Visitor
-
Public
13 Nov 2017 17:41 #186180
by 1066Boy
Replied by 1066Boy on topic 1999 Jimny
I am with Dan. A bit of sound proofing makes a world of difference. I just used some carpet underlay under the rubber floor covering.
Please Log in or Create an account to join the conversation.
- petejones69
- Topic Author
- Visitor
-
Public
13 Nov 2017 18:11 #186185
by petejones69
Replied by petejones69 on topic 1999 Jimny
As it happens, I have to remove some carpet from one of the bedrooms and there is some underlay underneath, which I can use.
Please Log in or Create an account to join the conversation.
Time to create page: 0.160 seconds