Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Vedran's "Headache"
- 1066Boy
- Visitor
-
Public
05 Apr 2017 18:59 #179937
by 1066Boy
Replied by 1066Boy on topic Vedran's "Headache"
Hi Mraz, were did you get your rear recovery loops form? A link would be useful.
Please Log in or Create an account to join the conversation.
- Mraz
- Topic Author
- Visitor
-
Public
05 Apr 2017 19:14 #179939
by Mraz
Replied by Mraz on topic Vedran's "Headache"
Shackles are from local hardware store, they're tested for 3T (maybe 3.5T, I forgot) and are 2-3 quid each and I made the mounts. Sorry, I'm not really helpful.
Please Log in or Create an account to join the conversation.
- 1066Boy
- Visitor
-
Public
05 Apr 2017 19:16 #179940
by 1066Boy
Replied by 1066Boy on topic Vedran's "Headache"
OK no problem. Thanks for the swift reply.
Please Log in or Create an account to join the conversation.
- Mraz
- Topic Author
- Visitor
-
Public
14 Apr 2017 20:18 #180250
by Mraz
Replied by Mraz on topic Vedran's "Headache"
<iframe width="560" height="315" src="" frameborder="0" allowfullscreen>
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 1934
- Thank you received: 554
15 Apr 2017 07:12 #180259
by Riccy
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic Vedran's "Headache"
Nice lanes - Very pretty forest there
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
Time to create page: 0.234 seconds