North east Jimny...........Gaz's

biggaz wrote: LIKE



Go onnn, PRESS IT!

tried pressing on IT but nothing happens!

lol

Well got this little lot today





all sorted






See on the fitted pic, where the hose pipe which was supplied is slotted over breather exit then ive put the pipe clip thing straight into that? You got two other reducers which im guessing went from the hose pipe into the reducer clip but the diameter of the hose and the black reducers was too different so the hose wouldnt have tightened round it snugly??

Did anyone else use the black reducers aswell between the hose and the reducer clip?

Cant see any probs the way ive did it though, fit nice and tightly into hose and cable tied on.

gaz.

I have just fitted the same kit on mine the same way as you have, i think the black pipes are incase you have different sized diff breather outlets, rather than being reducers. also might come in handy if you need to extend a pipe.


Richard.

is that kit just for the 2 diffs ????

Yes mate, both diffs and joins into one at the front.


Ah cheers im pleased someone else done the same I will hang onto the spare bits!

whats that for ?

to stop your axles filling up with dirty muddy water when you go wading
you can also put them on the gear box and transfer box

biggaz wrote: Yes mate, both diffs and joins into one at the front.


Ah cheers im pleased someone else done the same I will hang onto the spare bits!

ta-da!

I think you need a pressure washer next,GAZ

dirtydogz wrote: I think you need a pressure washer next,GAZ

LOL i jet washed the mud as much as i could after playing, took about an hour! Then tried pulling loads of clumps off whilst underneath!

Stiillllll loads under there lol, cant shift it!

Looks like a steam clean next,at the lorry cleaner.
Gets all the oil and salt of at the same time.

Gonna soak underneath with foam off the jetwash and leave for 5 then blast again lol.