Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Done some of this today.

  • S Mark
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Mar 2015 18:17 - 26 Mar 2015 18:18 #141396 by S Mark
Done some of this today. was created by S Mark
Happy with my work today.

Was going to do it out in the sun but it was raining :angry:


This was under the shit shield.


So I hit it with my hammer. :)
Attachments:
Last edit: 26 Mar 2015 18:18 by S Mark. Reason: Spelling

Please Log in or Create an account to join the conversation.

  • S Mark
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Mar 2015 18:22 #141398 by S Mark
Replied by S Mark on topic Done some of this today.
Then I cleaned it up and primed it with Upol weld through zinc rich.

From the top.
Attachments:

Please Log in or Create an account to join the conversation.

  • S Mark
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Mar 2015 18:28 #141399 by S Mark
Replied by S Mark on topic Done some of this today.
Made a cardboard template, then cut it out of 3mm metal and primed it.

And yep you got it I welded it in.
Attachments:

Please Log in or Create an account to join the conversation.

More
26 Mar 2015 18:31 #141400 by kirkynut
Replied by kirkynut on topic Done some of this today.
That's how mine was and had to be welded. That's the only welding mine's needed fortunately. My boot floor is rock solid thankfully!

Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

  • S Mark
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Mar 2015 18:37 #141401 by S Mark
Replied by S Mark on topic Done some of this today.
Made a start on the top. making a good return.

Then plating the hole. Once welded I cleaned it up and primed.

I then seam sealed over the welds to stop any water laying around on it.
Attachments:

Please Log in or Create an account to join the conversation.

  • S Mark
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Mar 2015 18:41 #141404 by S Mark
Replied by S Mark on topic Done some of this today.
A bit more seam sealer.

Then I done all the same to the other side.


Attachments:

Please Log in or Create an account to join the conversation.

  • S Mark
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Mar 2015 18:51 #141407 by S Mark
Replied by S Mark on topic Done some of this today.
Before priming, after welding.


Attachments:

Please Log in or Create an account to join the conversation.

  • S Mark
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Mar 2015 18:54 - 26 Mar 2015 18:56 #141408 by S Mark
Replied by S Mark on topic Done some of this today.

Then it was all primed and seam sealed. And it all had a good coat of hammerite hammered effect. :woohoo:




Attachments:
Last edit: 26 Mar 2015 18:56 by S Mark.

Please Log in or Create an account to join the conversation.

  • S Mark
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Mar 2015 18:58 #141409 by S Mark
Replied by S Mark on topic Done some of this today.
Is there any way of me putting right my photos?? Turning them round I mean.

Please Log in or Create an account to join the conversation.

  • gaz3359
  • Visitor
  • Visitor
    Public
26 Mar 2015 19:59 #141413 by gaz3359
Replied by gaz3359 on topic Done some of this today.
Good work something i need to look at on my own jimny.not sure on the photos unfortunatly

Please Log in or Create an account to join the conversation.

  • S Mark
  • Topic Author
  • Visitor
  • Visitor
    Public
26 Mar 2015 21:22 #141422 by S Mark
Replied by S Mark on topic Done some of this today.
Thanks gaz it was something I had been meaning to do since I cut my bumper back late last year and saw it. It's well worth doing before it gets to bad.

Please Log in or Create an account to join the conversation.

Time to create page: 0.176 seconds
Joomla template by a4joomla