Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Expedition Jimny Project

  • Decalwizard
  • Visitor
  • Visitor
    Public
16 Dec 2013 14:55 #96424 by Decalwizard
Replied by Decalwizard on topic Expedition Jimny Project
Thanks Marty appreciate it..

Keep watching as I have loads more stuff planned for it

Steve

Please Log in or Create an account to join the conversation.

  • Ruby2
  • Visitor
  • Visitor
    Public
02 Jan 2014 16:25 #98717 by Ruby2
Replied by Ruby2 on topic Expedition Jimny Project
Hi Steve
Well Matt has been in touch and should have the rack ready for the feet welding Mon/Tue ish
So just before I go I've to take the std bars off.
Could you advise on how you got to the nuts to remove them?
Ta
Richard

Please Log in or Create an account to join the conversation.

  • Decalwizard
  • Visitor
  • Visitor
    Public
02 Jan 2014 16:37 #98719 by Decalwizard
Replied by Decalwizard on topic Expedition Jimny Project
Just pop the plastic end caps off with a small flat blade screwdriver, the nuts are visible once the end caps are removed

Please Log in or Create an account to join the conversation.

  • Ruby2
  • Visitor
  • Visitor
    Public
02 Jan 2014 16:52 #98723 by Ruby2
Replied by Ruby2 on topic Expedition Jimny Project
Cheers Steve.
I'll have a closer look, I did have a quick look for some end caps but couldn't see any. They must be better hidden than I thought they would be :-/
Ta
Hopefully pictures with the new rack soon ;-)

Please Log in or Create an account to join the conversation.

  • Decalwizard
  • Visitor
  • Visitor
    Public
02 Jan 2014 21:11 #98798 by Decalwizard
Replied by Decalwizard on topic Expedition Jimny Project
I found this from an old post of Halfords

Please Log in or Create an account to join the conversation.

  • Ruby2
  • Visitor
  • Visitor
    Public
03 Jan 2014 07:59 #98835 by Ruby2
Replied by Ruby2 on topic Expedition Jimny Project
Cheers Steve :-)
That's why I couldn't see where the bolt covers where. I expected the end caps to have little flick out grommets and not the whole cap to come off.
At least I know what to do now :-))
Ta
Richard

Please Log in or Create an account to join the conversation.

Time to create page: 0.155 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.