Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Sheps awesome 2013 jimny
- Shep
- Topic Author
- Visitor
-
Public
- Shep
- Topic Author
- Visitor
-
Public
08 Jul 2013 11:41 #76416
by Shep
Replied by Shep on topic Sheps awesome 2013 jimny
Modifying a ORA rear bar to make it a bit more suitable to tropical Australian conditions.
Also fitted a haymon reese receiver style tow bar
Also fitted a haymon reese receiver style tow bar
Please Log in or Create an account to join the conversation.
- Shep
- Topic Author
- Visitor
-
Public
26 Jul 2013 08:02 #78238
by Shep
Replied by Shep on topic Sheps awesome 2013 jimny
Got my winch bumper fitted, not the best photo but I am going wheeling tomorrow so will take some more
Please Log in or Create an account to join the conversation.
- Dave cc
- Visitor
-
Public
26 Jul 2013 17:32 - 26 Jul 2013 17:37 #78267
by Dave cc
Hope you resolved this is normally happens when the chemicals used for plateing get into nooks and crannies on fabrications and then leach out over a period of time powder coating is a far better solution for this sort of fabrication
Replied by Dave cc on topic Sheps awesome 2013 jimny
Shep wrote: They are ORA 4" arm's
Hope you resolved this is normally happens when the chemicals used for plateing get into nooks and crannies on fabrications and then leach out over a period of time powder coating is a far better solution for this sort of fabrication
Last edit: 26 Jul 2013 17:37 by Dave cc.
Please Log in or Create an account to join the conversation.
- Shep
- Topic Author
- Visitor
-
Public
26 Jul 2013 23:48 #78304
by Shep
Replied by Shep on topic Sheps awesome 2013 jimny
No resolution except being told that I would receive a discount on my next purchase.
Thing is I just bought a front winch bar off them and didn't receive a discount. Possibly the most annoying thing is the rear radius arms are to short and I am going to have to make some new ones.
Can see in this photo that is the arms were another 10mm longer they would be a perfect length, while I haven't measured the arms I suspect that they will be shorter then stock.
Thing is I just bought a front winch bar off them and didn't receive a discount. Possibly the most annoying thing is the rear radius arms are to short and I am going to have to make some new ones.
Can see in this photo that is the arms were another 10mm longer they would be a perfect length, while I haven't measured the arms I suspect that they will be shorter then stock.
Please Log in or Create an account to join the conversation.
- Dave cc
- Visitor
-
Public
27 Jul 2013 06:40 #78307
by Dave cc
Replied by Dave cc on topic Sheps awesome 2013 jimny
Not totaly shocked by that i tried to buy springs from them got told no you want our springs you buy our lift kit :sick:
Really dont think so so i went to KAP
far more helpfullwill even sell you a single spring if you damage or break one
Really dont think so so i went to KAP
far more helpfullwill even sell you a single spring if you damage or break one Please Log in or Create an account to join the conversation.
Time to create page: 0.128 seconds