My Jimny Cabrio 2003
- JuanGuillie
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- JuanGuillie
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- JuanGuillie
- Topic Author
- Visitor
-
Public
Also in the French side of Belgium, as part of the roadbook we could drive into a quarry.
The owner did "trace" a beautifull route to follow on his terrain.
Please Log in or Create an account to join the conversation.
- Tadpole
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- JuanGuillie
- Topic Author
- Visitor
-
Public
Will post some passages from this roadbook. Was big fun to drive this one!
First video is a test with a BULLET HD camera mounted outside on my snorkel.
NOTICE, sound get's loud sometimes :sick: , Bullet-cam is not a succes in the woods, too dark.
Will go for a GOPRO, if the misses do agree.
This is filmed in the same section but with the inside i-Phone, no sound because off all the dirty language that is spoken. :evil:
And another nice quit section into the woods, for same reasons as above .. no sound. :laugh:
Please Log in or Create an account to join the conversation.
- panosd
- Visitor
-
Public
Some internal roll cage pics?
Please Log in or Create an account to join the conversation.
- JuanGuillie
- Topic Author
- Visitor
-
Public
I was one of the lucky ones, coooooooool... as my 11 year old son said as we did managed it !
A lot of LR's, Pajero's en Nissan's didn't, they have their weight against them and the big step just before you get to the top was the most difficult. I took the left side and did take this a little bit sideways.
Winching man didn't expected that, has some extra grey hair's now.
Did took it in 2 low with ARB-rear locker on.
Oh yes, no sound on this vid neither.
Please Log in or Create an account to join the conversation.
- JuanGuillie
- Topic Author
- Visitor
-
Public
panosd wrote: Hello and welcome.
Some internal roll cage pics?
Will take some tomorrow or saturday.
To put this rollcage into my car it's very easy because it's a Cabrio.
Have some idea's to make it stronger, a complete "X"-section at the main hoop (now only one "/" )
and at the back also one extra.
All this with extra triangles.
Please Log in or Create an account to join the conversation.
- JuanGuillie
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- JuanGuillie
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- panosd
- Visitor
-
Public
At the front you haven't done anything?
Please Log in or Create an account to join the conversation.
- JuanGuillie
- Topic Author
- Visitor
-
Public
Allready now, if the Police will do a check of the car then it will be not OK.
When you have the chance of a good cop (and these are rare) then maybe i don't have to pay, but have to show my car within 48 hours without the built-in roll-cage at the police-station.
Anyway the triangles (for strenghtening) and cross-X section i will complete, also the bars to the back will receive a cross-bar (not X because of the possibility to take things easy out (or in).
Succes with your build and if you want you can publish some pictures.
Please Log in or Create an account to join the conversation.