My Jimny Cabrio 2003

And another down and up section, only 1 on 5 cars did manage to get up without getting winched.
I was one of the lucky ones, coooooooool... as my 11 year old son said as we did managed it !
A lot of LR's, Pajero's en Nissan's didn't, they have their weight against them and the big step just before you get to the top was the most difficult. I took the left side and did take this a little bit sideways.
Winching man didn't expected that, has some extra grey hair's now.
Did took it in 2 low with ARB-rear locker on.

Oh yes, no sound on this vid neither.

panosd wrote: Hello and welcome.

Some internal roll cage pics?

Will take some tomorrow or saturday.
To put this rollcage into my car it's very easy because it's a Cabrio.

Have some idea's to make it stronger, a complete "X"-section at the main hoop (now only one "/" )
and at the back also one extra.
All this with extra triangles.

@ panosd : some pictures you asked for.

and some more :

Many thanks for the pics. I am strating mine now so taking ideas.

At the front you haven't done anything?

@ panosd : No , in the front there is nothing, even i really want to extend the roll-cage to the front, i can't do it because off stupid Belgian laws.
Allready now, if the Police will do a check of the car then it will be not OK.
When you have the chance of a good cop (and these are rare) then maybe i don't have to pay, but have to show my car within 48 hours without the built-in roll-cage at the police-station.
Anyway the triangles (for strenghtening) and cross-X section i will complete, also the bars to the back will receive a cross-bar (not X because of the possibility to take things easy out (or in).
Succes with your build and if you want you can publish some pictures.