JerseyJimnys... Overlander Jimny
:woohoo:I am keeping the Jimny for the foreseeable future!
if and when you going to sell, I'll swap my 2005+ facelift bumper for your Kap Fibreglass and DIY bar ... love it, it looks great.
looking forward to more pics and descriptions of your mods
suggestions .... you don't need any, you've a well sorted truck
Please Log in or Create an account to join the conversation.
- JerseyJimny
- Topic Author
- Visitor
-
Public
However I am deffently pleased with the front end I never thought it would turn out like that!
Please Log in or Create an account to join the conversation.
- JerseyJimny
- Topic Author
- Visitor
-
Public
A experdition trailer was off the cards untill recently when i realized that space is a big factor (no pun intended) in the Jimny and i simply couldnt stuff everything in and ontop of the Jimny especially after fitting a RRT (Roof Top Tent)
So a expedition trailer seamed to be the best if not only option to enable longer self reliant trips
So i started shearching... and my first stop was Expedition Portal a online forum for vehicle expedition enthusiasts, mainly american based but there is some UK memers on there
They are big on Expo Trailers over there mainly with wrangers as they share the same problem as Jimnys
And the custom or adapted trailer designs are brillaint but my favourite one so far has to be this guys system
www.expeditionportal.com/forum/threads/1...a-Geotracker90-Build !
Here is the finnished article
I too are planning on starting from just an axle and building the frame myself so i can have the set-up as i wish
What are your guy opinions?
Please Log in or Create an account to join the conversation.
- MWells
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- JerseyJimny
- Topic Author
- Visitor
-
Public
Already making some plans of my own
Please Log in or Create an account to join the conversation.
- JerseyJimny
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Tadpole
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- JerseyJimny
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Tadpole
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- JerseyJimny
- Topic Author
- Visitor
-
Public
You could take the panel off snap off the last tab and cut a small slot in it to stop the wire from rubbing
Please Log in or Create an account to join the conversation.
- JerseyJimny
- Topic Author
- Visitor
-
Public
Please Log in or Create an account to join the conversation.
- Decalwizard
- Visitor
-
Public
Steve
Please Log in or Create an account to join the conversation.