jimny progress

had the jimny about 2 months now and removed all the mods i didn't want.
out with :
winch , cb

in with :
new shock bushes all round
insa turbo dakar tyres
aisin manual hubs
rear shock relocation brackets

i tried today to install the spacer to cure the lean but the axle just wouldn't drop far enough. need to get spring spacers. running well considering the lift , tyres etc . doing around 200 miles per tank.
been in touch with KAP suzuki. they have confirmed its a vehicle done by them a while ago
all in all , lovin' it. its gonna be around a long time. does everything i need of a motor.
the manual hubs have made a big difference ( must have been dragging a sticky vac hub around ) no noises now and believe it or not its faster now :huh:

you may have done this but did you undo the lower shock mount on both sides and jack the chassis up i have trouble getting my axles to hang i just brought a hi lift farm jack and some axle stands that are 24" at there lowest point

Hi mate off subject but you said you have removed the CB? what you doing with it and does it work because Im after one.

Thanks
James

bugger ! only undid the shock bolt on the drivers side . never thought the other side needed to go up

as for the cb , sorry sold it

you may have to take the front calipers off to so as not to stretch the brake pipe also helps the axle to drop lower

got that one covered goodridge extended hoses.