Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Winch Bumper
- Brian.SMC
- Topic Author
- Visitor
-
Public
15 Aug 2010 16:44 #4235
by Brian.SMC
Replied by Brian.SMC on topic Re:Winch Bumper
Well it was a fecin lot of work, if I was doing more sheet bumpers, I would need to get a lot of the cutting and bending done at the engineers.
Just the fairlead to fit when it arrives. I also made a proper front recovery point as I know the fella is still saving for a winch. Its onto the 6mm winch plate which is bolted in 6 places to the chassis.
Just the fairlead to fit when it arrives. I also made a proper front recovery point as I know the fella is still saving for a winch. Its onto the 6mm winch plate which is bolted in 6 places to the chassis.
Please Log in or Create an account to join the conversation.
- Brian.SMC
- Topic Author
- Visitor
-
Public
17 Aug 2010 14:24 - 17 Aug 2010 14:32 #4269
by Brian.SMC
Replied by Brian.SMC on topic Re:Winch Bumper
Yes mate need both sides and wheel bearing.
Finished.
Finished.
Last edit: 17 Aug 2010 14:32 by Brian.SMC.
Please Log in or Create an account to join the conversation.
Time to create page: 0.137 seconds